Features:

• Keyless chuck.
• Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
• Lithium-ion’s 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.
• 4 pole motor.
• Conveniently located push button for forward and reverse.
• High comfort grips.
• Large trigger.
• LED job light with afterglow.

Specification:

• Voltage 18 v
• Max. in wood 25 mm
• Max. in steel 10 mm
• No Load Speed 0 – 1800 rpm
• Max Torque 13.7 Nm
• Battery Type Lithium-ion
• Vibration: Drilling2.5 m/sec²
• Vibration K factor 1.5 m/sec²
• Noise sound pressure 73 dB(A)
• Noise K factor 3 dB(A)
• Net weight 1.8 kg

,

The post 18v 10mm Chuck Angle Drill appeared first on Broughton Plant Hire and Sales.

Features:

• LED Job light with pre-glow function.
• BLDC motor specially designed to provide, above all, more work amount on a single full battery charge.
• Fully Compatible with 18V 4.0Ah Battery with 36 minute charge time.
• Energy production is more efficient than brushed DC motor because of no friction loss caused by brushes, enabling lower amperage for reduced heat production and increased work amount on a single full battery charge.

Specification:

• Voltage 18 v
• Max Fastening Torque 160 Nm
• No Load Speed 0 – 2500 rpm
• Battery Type Lithium-ion
• Battery Ah 3.0 Ah
• Charging Time22 min
• Vibration: Fastening Bolt 15 m/sec²
• Vibration K factor 1.5 m/sec²
• Net weight 1.5 kg
• Variable Speed Control Trigger
• Driving Shank6.35mm (1/4″) Hex
• Machine ScrewM4-M8
• Impacts per Minute0-3200 ipm
• Maximum Output220 w

,

The post 18v Impact Driver appeared first on Broughton Plant Hire and Sales.

Features:

• Electronic 3-stage impact power selection to reduce fault tightening.
• Battery fuel gauge
• Variable speed control by trigger
• LED Job light with pre-glow and afterglow functions
• Forward/reverse rotation
• Electric brake
• Ergonomic soft grip.
• Compact overall length.

Specification:

• Battery Type Lithium-ion
• Voltage 18 v
• Driving Shank 1/2 Inch Square
• Blows per Minute (Hi) – ipm 0 – 3500 ipm
• Blows per Minute (Med) – ipm 0 – 2600 ipm
• Blows per Minute (Lo) – ipm 0 – 1800 ipm
• Standard Bolt M10-M20
• High Tensile Bolt M10-M16
• Maximum Output 280 w
• No Load Speed (hard/med/soft) 0-2800 / 2100 / 1600 rpm
• Max Fastening Torque 280 Nm
• Vibration: Fastening Bolt 11.5 m/sec²
• Vibration K factor 1.5 m/sec²
• Net weight 1.7 kg

,

The post 18v Impact Wrench 1/2 Inch SQ Drive appeared first on Broughton Plant Hire and Sales.

Features:

• As powerful as corded: up to 160 drilled holes (6 x 40 mm in C30/37 concrete) with one battery charge.
• With a weight of only 2.9 kg, it is ideally suitable for overhead work
• Pneumatic hammer mechanism, optimised for drilling holes of 4 – 12 mm in concrete (max. 18 mm)
• Innovative CoolPack batteries ensure optimum heat dissipation and therefore increase lifetime by up to 100% (cf. Li-Ion batteries without CoolPack)
• More than 50% longer battery runtime due to new 2.0 Ah batteries (cf. 36 V/1.3 Ah)
• No memory effect: the battery can be charged regardless of the charging state at any time, without damaging the cells
• Bosch Electronic Cell Protection (ECP): protects the battery against overload, overheating and deep discharge
• Bosch Hyper Charge: due to the rapid charging process, the batteries are charged to 75% after just half of the charge time
• Brushless Bosch EC motor: compact, lightweight and absolutely maintenance-free
• Low user fatigue due to Bosch Vibration Control

Specification:

• Rated power input430 W
• Max. impact energy1,8 J
• Impact rate at rated speed0 – 4.850 bpm
• Rated speed0 – 1.500 rpm
• Battery voltage36 V
• Battery capacity2 Ah
• Weight incl. battery2,9 kg
• Length297,0 mm
• Width83,0 mm
• Height207,0 mm
• Bit holderSDS-plus

,

The post 36v Hammer Drill SDS PLus appeared first on Broughton Plant Hire and Sales.

Features:

• Low weight and compact design for convenient work
• Optimised impact mechanism and special Bosch high-performance motor for the hardest applications
• With alternate chuck: exceptionally fast changes between SDS-plus and quick-change chuck
• More than 120 holes in concrete 6×40 mm with one battery charge
• Electric motor brake
• Forward/reverse rotation sliding switch with switch-on lock
• With chisel attachment MV 200 also suitable for chiselling
• Battery-compatible with other 24 V Max Power cordless tools from Bosch

Specification:

• Rated power input:…..350 W
• Impact rate at rated speed:…..0 – 4.400 rpm
• Rated speed:…..0 – 1.000 rpm
• Power output:…..270 W
• Single impact force:…..1,3 J
• Weight including battery, approx.:…..3,9 kg
• Length:…..370,0 mm
• Width:…..75,0 mm
• Height:…..220,0 mm
• Spindle collar:…..42 mm
• Battery capacity:…..2,6 Ah
• Battery voltage:…..24 V

,

The post 24v Cordless Hammer Drill SDS Plus appeared first on Broughton Plant Hire and Sales.

,

The post 14v/18v 13mm Chuck Combi Drill appeared first on Broughton Plant Hire and Sales.