Pipe Threading Machines

Ridgid 161 Receeder 4 Inch to 6 Inch

Ridgid 161 Receeder 4 Inch to 6 Inch

161 Threeder

Ridgid

Ridgid 161 Receeder 4 Inch to 6 Inch

Increases capacity of 2 Inch or 3 Inch threader to 4 Inch.

Operators Manual

Operators Manual

Recommended PPE

Increases capacity of 2 Inch or 3 Inch threader to 4 Inch.

More Information

Use– Accessory for Ridgid 300
Capacity– 4 Inch to 6 Inch
Optional Extras– Ratchet arm for manual in-situ threading, Pipe Support

Features

Jaw clutch prevents jamming.
Simple adjustment for tapered or straight threads.
Cam-type workholder sets instantly.
Fully enclosed gearing.
Right-hand only

,

Related Products

Hire

Tubela 15-54mm Ratchet Assisted Copper Bender

Tubela 15-54mm Ratchet Assisted Copper Bender

For all your tube bending requirements for copper, stainless steel, aluminium, conduit, mild steel tube. Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.

Hire

Victaulic 272SFS Roll Grooving Machine 2 Inch to 8 Inch C/W 300C Power Drive and Tristand

Victaulic 272SFS Roll Grooving Machine 2 Inch to 8 Inch C/W 300C Power Drive and Tristand

Portable roll groover mounts easily to a Victaulic VPD752 or Rigid 300 power drive. Hand pump operation with a unique pivot arm design reduces handle effort. Tracking rolls reduce pipe walk-off. VE272SFS permitted for roll grooving thin wall carbon steel pipe 2 Inch to 12 Inch.

Hire

Ridgid HC450 Hole Cutter for Mechanical Tees

Ridgid HC450 Hole Cutter for Mechanical Tees

The HC450 is ideal for mechanical, industrial maintenance and fire protection contractors since it cuts holes into a wide variety of pipe materials.

Hire

6 Inch Axxair Cutter C/W Bench

6 Inch Axxair Cutter C/W Bench

The Axxair cutter offers cutting without tube deformation and is ideal for thin wall stainless tubes and pipes. It provides a cut of quality geometry leaving a good surface condition.

Victaulic VE416 FSD 2 Inch to 12 Inch OGS Pipe

Victaulic VE416 FSD 2 Inch to 12 Inch OGS Pipe

The Victaulic VE416 Roll Grooving Tool Equipped with a pipe stabilizer for 6 Inch -16 Inch pipe sizes to control pipe sway. Groove depth adjuster provides precise groove dimensions and allows for easy adjustment for initial groove diameter.

Ridgid 141 Receeder 2 1/2 Inch to 4 Inch

Ridgid 141 Receeder 2 1/2 Inch to 4 Inch

Upgrades Ridgid 300 to 2 1/2 Inch - 4 Inch.

Ridgid 246 Snap Cutter up to 6 Inch

Ridgid 246 Snap Cutter up to 6 Inch

The Ridgid 246 Snap Cutter is quick and convenient to use and requires minimal clearance around the pipe.

Freeze Master 110v 8 - 61mm

Freeze Master 110v 8 - 61mm

The 690E is made to make building maintenance easy. Fitted with two high capacity freeze heads it is ideal for the engineer who needs to tackle the larger industrial and commercial pipe sizes.

Nipple Chuck

Holds short or close nipples for threading.

Machine Guards

Machine Guards keep pedestrians away from moving pipe on threading equipment.

Ridgid Additional Die Head

Ridgid Additional Die Head

Additional Die Head.

Ridgid 965/RJ98 Pipe Support/Pipe Roller 4 Inch to 12 Inch

Ideal for use with threading machines, roll grooving, or other pipe working applications.

Back to Pipe Threading Machines

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools