Pipe Threading Machines

Drip Tray

Drip Tray

Drip Tray

For use under machines to protect floors etc.

Operators Manual

Operators Manual

Recommended PPE

For use under machines to protect floors etc.

Additional Information

Features:

Collects oil and drips
For use under machines to protect floors etc

,

Related Products

Hire

Ridgid Stud Cutter 8MM

Ridgid Stud Cutter 8MM

The 1390 Threaded Rod Cutter is designed to cut threaded rods used to hang pipes for air conditioning, sprinkler installations and other lightweight frames from the ceiling. Makes clean cuts without damaging thread.

Hire

Ridgid 590L 14 Inch Dry Cut Saw

Ridgid 590L 14 Inch Dry Cut Saw

Ridgid 590L Dry Cut saw produces clean, virtually burr-free cuts on steel, copper, aluminium and plastics and an adjustable cutting angle 45 degrees - 90 degrees. Cuts Steel Tube up to 130mm and 115mm Box Section

Hire

Chain Wrench 36 Inch

Chain Wrench 36 Inch

Designed and sized to provide extra leverage for the toughest jobs.

Hire

Tubela 15-54mm Ratchet Assisted Copper Bender

Tubela 15-54mm Ratchet Assisted Copper Bender

For all your tube bending requirements for copper, stainless steel, aluminium, conduit, mild steel tube. Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.

Chain Wrench 48 Inch

Chain Wrench 48 Inch

Designed and sized to provide extra leverage for the toughest jobs.

Electric Water Test Pump Max. 1500PSI / 100BAR

Electric Water Test Pump Max. 1500PSI / 100BAR

The Hilta Electric Water Test Pump has a maximum Flow of 3.4 Litres/Min and a maximum pressure 1500psi / 100bar.

Ridgid HC450 Hole Cutter for Mechanical Tees

Ridgid HC450 Hole Cutter for Mechanical Tees

The HC450 is ideal for mechanical, industrial maintenance and fire protection contractors since it cuts holes into a wide variety of pipe materials.

Ridgid 975 Combo Insitu Roll Groover 1 1/4 Inch to 6 Inch

Ridgid 975 Combo Insitu Roll Groover 1 1/4 Inch to 6 Inch

The Model 975 Combo roll Groover is two tools in one. Like other RIDGID roll Groovers, the 975 mounts on the RIDGID 300 Power Drive for machine-powered roll grooving jobs, but is also designed to manually roll groove in-place pipe.

Ridgid Additional Die Head

Ridgid Additional Die Head

Additional Die Head.

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

A versatile and lightweight machine that can extend its threading ability up to 6 Inch by using either a 141 or 161 geared threader.

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP c/w Pipe Support

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP c/w Pipe Support

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP C/W Die Heads and Pipe Support.

Ridgid 141 Receeder 2 1/2 Inch to 4 Inch

Ridgid 141 Receeder 2 1/2 Inch to 4 Inch

Upgrades Ridgid 300 to 2 1/2 Inch - 4 Inch.

Back to Pipe Threading Machines

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools