Pressure/Pipe Testing

3.5 CFM Compressor 115 PS1 C/W Hose & 1/2 Inch BSP Bush

3.5 CFM Compressor 115 PS1 C/W Hose & 1/2 Inch BSP Bush

Compressor 3.5 Cfm

3.5 CFM Compressor 115 PS1 C/W Hose & 1/2 Inch BSP Bush

This 3.5 CFM compressor compact model incorporates features found on much larger professional machines.

Operators Manual

Operators Manual

Recommended PPE

This 3.5 CFM compressor compact model incorporates features found on much larger professional machines.

Additional Information

Features:

3.5cfm air displacement.
10 litre air receiver (CE certified).
0.65hp, 110v, 1ph motor with built in overload protection.
8bar (116 psi) maximum working pressure, controlled by a fully automatic pressure switch.
Dimensions (LWH): 440 x 350 x 660mm

,

Related Products

Hire

8 CFM Compressor 130 PS1 C/W Hose and 1/2 Inch BSP Bush

8 CFM Compressor 130 PS1 C/W Hose and 1/2 Inch BSP Bush

This 8 CFM Compressor is a sturdy mid range air compressor packed with impressive features and capable of delivering a full 10 Bar working pressure.

Hire

Electric Water Test Pump Max. 1500PSI / 100BAR

Electric Water Test Pump Max. 1500PSI / 100BAR

The Hilta Electric Water Test Pump has a maximum Flow of 3.4 Litres/Min and a maximum pressure 1500psi / 100bar.

Hire

Petrol Water Test Pump Max. 1500PSI / 100BAR

Petrol Water Test Pump Max. 1500PSI / 100BAR

228-petrol-water-test-pump-max-100-bar

This Hilta Petrol Water Test Pump is has a fuel Tank capacity 3.6 Ltrs and can reach a maximum pressure of 1500psi / 100bar.

Hire

Ridgid 1450 Hand Pressure Test Pump Max. 725PSI / 50BAR

Ridgid 1450 Hand Pressure Test Pump Max. 725PSI / 50BAR

The 1450 Pressure Test Pump tests hydraulically for leaks in installations which are required to be leak proof and will test systems up to 725 PSI. Especially for use in heating, compressed air, refrigeration systems, oil installations, sprinkler systems and other small bore pipe installations.

Electric Water Test Pump Max. 1500PSI / 100BAR

Electric Water Test Pump Max. 1500PSI / 100BAR

The Hilta Electric Water Test Pump has a maximum Flow of 3.4 Litres/Min and a maximum pressure 1500psi / 100bar.

Ridgid 1450 Hand Pressure Test Pump Max. 725PSI / 50BAR

Ridgid 1450 Hand Pressure Test Pump Max. 725PSI / 50BAR

The 1450 Pressure Test Pump tests hydraulically for leaks in installations which are required to be leak proof and will test systems up to 725 PSI. Especially for use in heating, compressed air, refrigeration systems, oil installations, sprinkler systems and other small bore pipe installations.

8 CFM Compressor 130 PS1 C/W Hose and 1/2 Inch BSP Bush

8 CFM Compressor 130 PS1 C/W Hose and 1/2 Inch BSP Bush

This 8 CFM Compressor is a sturdy mid range air compressor packed with impressive features and capable of delivering a full 10 Bar working pressure.

Rems Solar Push K60

Rems Solar Push K60

Self-suction centrifugal pump, suitable for different transport media, e.g. heat transfer liquids, antifreeze, water, aqueous solutions, emulsions. With proven, powerful condenser motor, quiet running, 860 W, on/off switch.

4 Inch Axxair Cutter C/W Bench

4 Inch Axxair Cutter C/W Bench

The Axxair cutter offers cutting without tube deformation and is ideal for thin wall stainless tubes and pipes. It provides a cut of quality geometry leaving a good surface condition.

Ridgid 918 Roll Groover, Power Drive & Pipe Support

Ridgid 918 Roll Groover, Power Drive & Pipe Support

The RIDGID Model 918 Hydraulic Roll Groover features a powerful 15-ton hydraulic ram in a compact, easy to transport unit. With one man set-up and operation, the 918 is the ideal groover for job site requirements.

Victaulic VE416 FSD 14 Inch to 16 Inch AGS Pipe

Victaulic VE416 FSD 14 Inch to 16 Inch AGS Pipe

The Victaulic VE416 Roll Grooving Tool Equipped with a pipe stabilizer for 6 Inch -16 Inch pipe sizes to control pipe sway. Groove depth adjuster provides precise groove dimensions and allows for easy adjustment for initial groove diameter.

Ridgid Stud Cutter 10MM

Ridgid Stud Cutter 10MM

The 1390 Threaded Rod Cutter is designed to cut threaded rods used to hang pipes for air conditioning, sprinkler installations and other lightweight frames from the ceiling. Makes clean cuts without damaging thread.

Back to Pipe Fitting

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools