Brymec BMLCP1 Multi Layer Battery Press Tool 16-32MM

Brymec BMLCP1 Multi Layer Battery Press Tool 16-32MM

Brymec BMLCP1 Multi Layer Battery Press Tool 16-32MM

This kit comprises of a cordless press tool inclusive of 16-32mm jaws for multi layer composite pipe.

Operators Manual

Operators Manual

Recommended PPE

This kit comprises of a cordless press tool inclusive of 16-32mm jaws for multi layer composite pipe.

Features:

Cordless Press Tool
Tools available are: Klauke/REMS Press / Power Press
Capacity 16 – 32mm
No more than 8 hours continuous use

Related Products

Hire

Mapress Steel Kit 6C 15-76MM

Mapress Steel Kit 6C 15-76MM

This kit comprises of a Novopress Cordless press tool (ACO203XL) complete with 15-76mm collars and adaptors suitable for Geberit Carbon and Stainless Steel press fittings.

Hire

Viega Press In Connector Tool Kit

Viega Press In Connector Tool Kit

The Megapress press-in branch connector is suitable for thick-walled steel pipes. The press-in branch connector generates a threaded connection in pipelines. It is particularly suitable for confined spaces, e.g. manifold installations for sensors, thermometers, or drains. The press-in branch connector is not suitable for use in drinking water installations. For this reason, press-in branch connectors are labelled with a black symbol “Not drinking water”. It is not permitted to use the press-in branch connector for fuel gases pursuant to DVGW Worksheet G 260 or in connection with Prestabo system components.

Hire

Viega Copper Kit 2 15-54MM

Viega Copper Kit 2 15-54MM

This kit comprises of a Viega Battery press tool complete with 15-54mm jaws suitable for Viega Copper Profipress Systems.

Hire

SANHA Copper Kit 2 15-35MM

SANHA Copper Kit 2 15-35MM

This kit comprises of a Novopress cordless press tool (ACO203) complete with 15-35mm jaws suitable for Sanha copper press fittings.

Yorkshire Multi Layer Battery Tool 16-63MM

Yorkshire Multi Layer Battery Tool 16-63MM

This kit comprises of a REMS battery press tool inclusive of 16-63mm jaws for multi layer.

Wavin Kit 1 16-40mm

Wavin Kit 1 16-40mm

The Wavin Kit 1 comprises of a Novopress ACO102 Press Tool inclusive of 16 - 40mm jaws.

SANHA Copper Kit 2 15-35MM

SANHA Copper Kit 2 15-35MM

This kit comprises of a Novopress cordless press tool (ACO203) complete with 15-35mm jaws suitable for Sanha copper press fittings.

SANHA Copper Kit 8C 67-108MM

SANHA Copper Kit 8C 67-108MM

This kit comprises of a Novopress Cordless press tool (ACO203XL) complete with 67-108mm collars and adaptors suitable for Sanha Copper press fittings.

Rems Solar Push K60

Rems Solar Push K60

Self-suction centrifugal pump, suitable for different transport media, e.g. heat transfer liquids, antifreeze, water, aqueous solutions, emulsions. With proven, powerful condenser motor, quiet running, 860 W, on/off switch.

ADVANCE WELDING AW315 ELECTROFUSION MACHINE

ADVANCE WELDING AW315 ELECTROFUSION MACHINE

This machine is designed to weld electrofusion fittings suitable for low pressure PE pipe work systems from 32mm to 315mm diameter. It will weld fittings commonly made by Geberit, Wavin, Valsir, Polypipe and Akatherm which are used for siphonic rainwater and waste water applications.

GH38 Gas Hoist 3.8M

GH38 Gas Hoist 3.8M

Lightweight portable hoist, powered by CO² gas, sets up in seconds and operated by pendant control to activate up and down functions.

Ridgid 246 Snap Cutter up to 6 Inch

Ridgid 246 Snap Cutter up to 6 Inch

The Ridgid 246 Snap Cutter is quick and convenient to use and requires minimal clearance around the pipe.

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools