Pipe Threading Machines

Drip Tray

Drip Tray

Drip Tray

For use under machines to protect floors etc.

Operators Manual

Operators Manual

Recommended PPE

For use under machines to protect floors etc.

Additional Information

Features:

Collects oil and drips
For use under machines to protect floors etc

,

Related Products

Hire

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP c/w Pipe Support

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP c/w Pipe Support

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP C/W Die Heads and Pipe Support.

Hire

Ridgid 258 Hydraulic/Powered Pipe Cutter 2 1/2 Inch to 8 Inch

Ridgid 258 Hydraulic/Powered Pipe Cutter 2 1/2 Inch to 8 Inch

The RIDGID Model 258 Power Pipe Cutter cuts 2 1/2 Inch (65 mm) to 8 Inch (200 mm) schedule 10*/40 steel pipe, galvanized pipe, rigid conduit, etc. Powered by the RIDGID No. 700 Power Drive (110v) or Ridgid 760 FXP Power Drive (60v cordless) , the 258 is a displacement cutter that provides square cuts.

Hire

Ridgid 46 Pipe Support

Ridgid 46 Pipe Support

Ideal for use with threading machines, roll grooving, or other pipe working applications.

Hire

Ridgid 6S Pipe Roller Cutter 4 Inch to 6 Inch

Ridgid 6S Pipe Roller Cutter 4 Inch to 6 Inch

For fast clean pipe cutting.

7.5 CFM Compressor 115 PS1 C/W Hose and 1/2 Inch BSP Bush

7.5 CFM Compressor 115 PS1 C/W Hose and 1/2 Inch BSP Bush

High output with compact dimensions makes this tough piston compressor especially handy for on-site tasks involving fixing, spraying, inflating and dust / debris blowing.

Ridgid 258 Hydraulic/Powered Pipe Cutter 2 1/2 Inch to 8 Inch

Ridgid 258 Hydraulic/Powered Pipe Cutter 2 1/2 Inch to 8 Inch

The RIDGID Model 258 Power Pipe Cutter cuts 2 1/2 Inch (65 mm) to 8 Inch (200 mm) schedule 10*/40 steel pipe, galvanized pipe, rigid conduit, etc. Powered by the RIDGID No. 700 Power Drive (110v) or Ridgid 760 FXP Power Drive (60v cordless) , the 258 is a displacement cutter that provides square cuts.

12 Inch Axxair Cutter C/W Bench

12 Inch Axxair Cutter C/W Bench

The Axxair cutter offers cutting without tube deformation and is ideal for thin wall stainless tubes and pipes. It provides a cut of quality geometry leaving a good surface condition.

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP c/w Pipe Support

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP c/w Pipe Support

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP C/W Die Heads and Pipe Support.

Machine Guards

Machine Guards keep pedestrians away from moving pipe on threading equipment.

Rex Threading Machine 1/2 Inch to 4 Inch BSP c/w Pipe Support

Rex Threading Machine 1/2 Inch to 4 Inch BSP c/w Pipe Support

Rex Threading Machine N100A.

Ridgid Additional Die Head

Ridgid Additional Die Head

Additional Die Head.

Back to Pipe Threading Machines

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools