Pipe Threading Machines

Drip Tray

Drip Tray

Drip Tray

For use under machines to protect floors etc.

Operators Manual

Operators Manual

Recommended PPE

For use under machines to protect floors etc.

Additional Information

Features:

Collects oil and drips
For use under machines to protect floors etc

,

Related Products

Hire

Tubela 15-54mm Ratchet Assisted Copper Bender

Tubela 15-54mm Ratchet Assisted Copper Bender

For all your tube bending requirements for copper, stainless steel, aluminium, conduit, mild steel tube. Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.

Hire

Ridgid 916 Roll Groover 1 Inch Only

Ridgid 916 Roll Groover 1 Inch Only

The RIDGID Model 916 Roll Groover is the most durable and efficient lightweight portable unit available. Built with a solid, durable cast-iron housing, it withstands heavy usage, yet is light enough for easy transportation.

Hire

RX Roller Set Carbon SCH 10 and Below

RX Roller Set Carbon SCH 10 and Below

RX Roller Set Carbon SCH 10 and Below.

Hire

Hilmor 15 - 35mm Stand Bender

Hilmor 15 - 35mm Stand Bender

A portable pipe bender to cover tube of 15-35 mm.

Ridgid 466 Hinged 4 Wheel Cutter 4 Inch to 6 Inch

Ridgid 466 Hinged 4 Wheel Cutter 4 Inch to 6 Inch

Designed for rapid cutting of steel pipe and heavy-wall steel pipe.

8 CFM Compressor 130 PS1 C/W Hose and 1/2 Inch BSP Bush

8 CFM Compressor 130 PS1 C/W Hose and 1/2 Inch BSP Bush

This 8 CFM Compressor is a sturdy mid range air compressor packed with impressive features and capable of delivering a full 10 Bar working pressure.

Ridgid HC450 Hole Cutter for Mechanical Tees

Ridgid HC450 Hole Cutter for Mechanical Tees

The HC450 is ideal for mechanical, industrial maintenance and fire protection contractors since it cuts holes into a wide variety of pipe materials.

6 Inch Axxair Cutter C/W Bench

6 Inch Axxair Cutter C/W Bench

The Axxair cutter offers cutting without tube deformation and is ideal for thin wall stainless tubes and pipes. It provides a cut of quality geometry leaving a good surface condition.

Ridgid 161 Receeder 4 Inch to 6 Inch

Ridgid 161 Receeder 4 Inch to 6 Inch

Increases capacity of 2 Inch or 3 Inch threader to 4 Inch.

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP c/w Pipe Support

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP c/w Pipe Support

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP C/W Die Heads and Pipe Support.

Machine Guards

Machine Guards keep pedestrians away from moving pipe on threading equipment.

Rex Threading Machine 1/2 Inch to 4 Inch BSP c/w Pipe Support

Rex Threading Machine 1/2 Inch to 4 Inch BSP c/w Pipe Support

Rex Threading Machine N100A.

Back to Pipe Threading Machines

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools