Pipe Threading Machines

Drip Tray

Drip Tray

Drip Tray

For use under machines to protect floors etc.

Operators Manual

Operators Manual

Recommended PPE

For use under machines to protect floors etc.

Additional Information

Features:

Collects oil and drips
For use under machines to protect floors etc

,

Related Products

Hire

Ridgid 161 Receeder 4 Inch to 6 Inch

Ridgid 161 Receeder 4 Inch to 6 Inch

Increases capacity of 2 Inch or 3 Inch threader to 4 Inch.

Hire

Ridgid 590L 14 Inch Dry Cut Saw

Ridgid 590L 14 Inch Dry Cut Saw

Ridgid 590L Dry Cut saw produces clean, virtually burr-free cuts on steel, copper, aluminium and plastics and an adjustable cutting angle 45 degrees - 90 degrees. Cuts Steel Tube up to 130mm and 115mm Box Section

Hire

Rems Solar Push K60

Rems Solar Push K60

Self-suction centrifugal pump, suitable for different transport media, e.g. heat transfer liquids, antifreeze, water, aqueous solutions, emulsions. With proven, powerful condenser motor, quiet running, 860 W, on/off switch.

Hire

Ridgid 46 Pipe Support

Ridgid 46 Pipe Support

Ideal for use with threading machines, roll grooving, or other pipe working applications.

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support.

10 Inch Pulling Tool

10 Inch Pulling Tool

With the pulling tool no blocks, chains or machinery are needed and all operations can be carried out by one man. Simply place the tool on the pipes and pull them together.

Hilmor 15 - 22mm Scissor Bender

Hilmor 15 - 22mm Scissor Bender

A compact bender with precision high pressure aluminium die cast formers and guides to produce sets, offsets, multiple bends etc in tubes of a maximum diameter of 22 mm.

Ridgid 460 Tripod Vice 6 Inch Capacity

Ridgid 460 Tripod Vice 6 Inch Capacity

Ridgid Tripod Vices feature integral folding legs for easy transport and setup, tool hangers and a base which overhangs the front legs for clear tool swing.

Rex Threading Machine 1/2 Inch to 4 Inch NPT c/w Pipe Support

Rex Threading Machine 1/2 Inch to 4 Inch NPT c/w Pipe Support

Rex Threading Machine N100A.

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP c/w Pipe Support

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP c/w Pipe Support

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP C/W Die Heads and Pipe Support.

Nipple Chuck

Holds short or close nipples for threading.

Ridgid 965/RJ98 Pipe Support/Pipe Roller 4 Inch to 12 Inch

Ideal for use with threading machines, roll grooving, or other pipe working applications.

Back to Pipe Threading Machines

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools