Electric Water Test Pump Max. 1500PSI / 100BAR
Electric Water Test Pump Max. 1500PSI / 100BAR
The Hilta Electric Water Test Pump has a maximum Flow of 3.4 Litres/Min and a maximum pressure 1500psi / 100bar.
The Hilta Electric Water Test Pump has a maximum Flow of 3.4 Litres/Min and a maximum pressure 1500psi / 100bar.
Additional Information
Features:
- 110 volt electric motor
- 82dB(A) @ 7m
- 1500psi / 100bar
Specification:
- FuelElectric
- Fuel1500
- Engine Type110Volt Electric Motor
- Average Sound Pressure Leve82dB(A) @ 7m
- Maximum Pressure1500psi / 100bar
- Maximum Flow3.4 Litres/Min
These are the recommended PPE required for this product.



Related Products

Rems Solar Push K60
Self-suction centrifugal pump, suitable for different transport media, e.g. heat transfer liquids, antifreeze, water, aqueous solutions, emulsions. With proven, powerful condenser motor, quiet running, 860 W, on/off switch.

3.5 CFM Compressor 115 PS1 C/W Hose & 1/2 Inch BSP Bush
This 3.5 CFM compressor compact model incorporates features found on much larger professional machines.

7.5 CFM Compressor 115 PS1 C/W Hose and 1/2 Inch BSP Bush
High output with compact dimensions makes this tough piston compressor especially handy for on-site tasks involving fixing, spraying, inflating and dust / debris blowing.

Ridgid 1450 Hand Pressure Test Pump Max. 725PSI / 50BAR
The 1450 Pressure Test Pump tests hydraulically for leaks in installations which are required to be leak proof and will test systems up to 725 PSI. Especially for use in heating, compressed air, refrigeration systems, oil installations, sprinkler systems and other small bore pipe installations.

Tubela 15-54mm Ratchet Assisted Copper Bender
For all your tube bending requirements for copper, stainless steel, aluminium, conduit, mild steel tube.
Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.

RX Roller Set Stainless Steel SCH 10 and Below
RX Roller Set to suit stainless steel SCH 10 and below.

Victaulic 272SFS Roll Grooving Machine 2 Inch to 8 Inch C/W 300C Power Drive and Tristand
Portable roll groover mounts easily to a Victaulic VPD752 or Rigid 300 power drive. Hand pump operation with a unique pivot arm design reduces handle effort. Tracking rolls reduce pipe walk-off. VE272SFS permitted for roll grooving thin wall carbon steel pipe 2 Inch to 12 Inch.


