Pressure/Pipe Testing

Electric Water Test Pump Max. 1500PSI / 100BAR

Electric Water Test Pump Max. 1500PSI / 100BAR

Electric Water Test Pump Max. 1500PSI / 100BAR

The Hilta Electric Water Test Pump has a maximum Flow of 3.4 Litres/Min and a maximum pressure 1500psi / 100bar.

Operators Manual

Operators Manual

Recommended PPE

The Hilta Electric Water Test Pump has a maximum Flow of 3.4 Litres/Min and a maximum pressure 1500psi / 100bar.

Additional Information

Features:

110 volt electric motor
82dB(A) @ 7m
1500psi / 100bar

Specification:

FuelElectric
Fuel1500
Engine Type110Volt Electric Motor
Average Sound Pressure Leve82dB(A) @ 7m
Maximum Pressure1500psi / 100bar
Maximum Flow3.4 Litres/Min

Related Products

Hire

8 CFM Compressor 130 PS1 C/W Hose and 1/2 Inch BSP Bush

8 CFM Compressor 130 PS1 C/W Hose and 1/2 Inch BSP Bush

This 8 CFM Compressor is a sturdy mid range air compressor packed with impressive features and capable of delivering a full 10 Bar working pressure.

Hire

Rems Solar Push K60

Rems Solar Push K60

Self-suction centrifugal pump, suitable for different transport media, e.g. heat transfer liquids, antifreeze, water, aqueous solutions, emulsions. With proven, powerful condenser motor, quiet running, 860 W, on/off switch.

Hire

7.5 CFM Compressor 115 PS1 C/W Hose and 1/2 Inch BSP Bush

7.5 CFM Compressor 115 PS1 C/W Hose and 1/2 Inch BSP Bush

High output with compact dimensions makes this tough piston compressor especially handy for on-site tasks involving fixing, spraying, inflating and dust / debris blowing.

Hire

Ridgid 1450 Hand Pressure Test Pump Max. 725PSI / 50BAR

Ridgid 1450 Hand Pressure Test Pump Max. 725PSI / 50BAR

The 1450 Pressure Test Pump tests hydraulically for leaks in installations which are required to be leak proof and will test systems up to 725 PSI. Especially for use in heating, compressed air, refrigeration systems, oil installations, sprinkler systems and other small bore pipe installations.

Rems Solar Push K60

Rems Solar Push K60

Self-suction centrifugal pump, suitable for different transport media, e.g. heat transfer liquids, antifreeze, water, aqueous solutions, emulsions. With proven, powerful condenser motor, quiet running, 860 W, on/off switch.

Ridgid 1450 Hand Pressure Test Pump Max. 725PSI / 50BAR

Ridgid 1450 Hand Pressure Test Pump Max. 725PSI / 50BAR

The 1450 Pressure Test Pump tests hydraulically for leaks in installations which are required to be leak proof and will test systems up to 725 PSI. Especially for use in heating, compressed air, refrigeration systems, oil installations, sprinkler systems and other small bore pipe installations.

Petrol Water Test Pump Max. 1500PSI / 100BAR

Petrol Water Test Pump Max. 1500PSI / 100BAR

228-petrol-water-test-pump-max-100-bar

This Hilta Petrol Water Test Pump is has a fuel Tank capacity 3.6 Ltrs and can reach a maximum pressure of 1500psi / 100bar.

7.5 CFM Compressor 115 PS1 C/W Hose and 1/2 Inch BSP Bush

7.5 CFM Compressor 115 PS1 C/W Hose and 1/2 Inch BSP Bush

High output with compact dimensions makes this tough piston compressor especially handy for on-site tasks involving fixing, spraying, inflating and dust / debris blowing.

Ridgid 916 Portable Roll Groover 1 1/4 Inch to 6 Inch

Ridgid 916 Portable Roll Groover 1 1/4 Inch to 6 Inch

The RIDGID Model 916 Roll Groover is the most durable and efficient lightweight portable unit available. Built with a solid, durable cast-iron housing, it withstands heavy usage, yet is light enough for easy transportation.

Tubela Rotary Scissor Bender 15-54mm Carbon Steel/Copper

Tubela Rotary Scissor Bender 15-54mm Carbon Steel/Copper

The Tubela H3PR is a hand operated 2" nb (60.3mmOD) capacity ram-press pipe bender for Gas or Black pipe, but also for bending thicker wall hydraulic steel and stainless steel tubes that are being increasingly used in industry where higher pressures and temperatures are required. Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

A versatile and lightweight machine that can extend its threading ability up to 6 Inch by using either a 141 or 161 geared threader.

Ridgid 258XL Hydraulic/Powered Pipe Cutter 8 Inch to 12 Inch

Ridgid 258XL Hydraulic/Powered Pipe Cutter 8 Inch to 12 Inch

The RIDGID 258XL offers 8 Inch (200 mm) to 12 Inch (300 mm) diameter pipe cutting capacity. Powered by the RIDGID No. 700 Power Drive (110v) or Ridgid 760 FXP Power Drive (60v cordless) , the 258XL is a displacement cutter that provides square cuts.

Back to Pipe Fitting

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools