0 items
Electric Water Test Pump Max. 1500PSI / 100BAR
Electric Water Test Pump Max. 1500PSI / 100BAR
The Hilta Electric Water Test Pump has a maximum Flow of 3.4 Litres/Min and a maximum pressure 1500psi / 100bar.
The Hilta Electric Water Test Pump has a maximum Flow of 3.4 Litres/Min and a maximum pressure 1500psi / 100bar.
Additional Information
Features:
- 110 volt electric motor
- 82dB(A) @ 7m
- 1500psi / 100bar
Specification:
- FuelElectric
- Fuel1500
- Engine Type110Volt Electric Motor
- Average Sound Pressure Leve82dB(A) @ 7m
- Maximum Pressure1500psi / 100bar
- Maximum Flow3.4 Litres/Min
These are the recommended PPE required for this product.

Eye Protection

Hand Protection

Foot Protection
Related Products
Hire

Rems Solar Push K60
Self-suction centrifugal pump, suitable for different transport media, e.g. heat transfer liquids, antifreeze, water, aqueous solutions, emulsions. With proven, powerful condenser motor, quiet running, 860 W, on/off switch.
Hire

Petrol Water Test Pump Max. 1500PSI / 100BAR
228-petrol-water-test-pump-max-100-bar
This Hilta Petrol Water Test Pump is has a fuel Tank capacity 3.6 Ltrs and can reach a maximum pressure of 1500psi / 100bar.
Hire

8 CFM Compressor 130 PS1 C/W Hose and 1/2 Inch BSP Bush
This 8 CFM Compressor is a sturdy mid range air compressor packed with impressive features and capable of delivering a full 10 Bar working pressure.
Hire

Ridgid Stud Cutter 10MM
The 1390 Threaded Rod Cutter is designed to cut threaded rods used to hang pipes for air conditioning, sprinkler installations and other lightweight frames from the ceiling. Makes clean cuts without damaging thread.
Hire

Ridgid 590L 14 Inch Dry Cut Saw
Ridgid 590L Dry Cut saw produces clean, virtually burr-free cuts on steel, copper, aluminium and plastics and an adjustable cutting angle 45 degrees - 90 degrees. Cuts Steel Tube up to 130mm and 115mm Box Section
Hire

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support
A versatile and lightweight machine that can extend its threading ability up to 6 Inch by using either a 141 or 161 geared threader.




