Hilmor 15 - 35mm Stand Bender

Hilmor 15 - 35mm Stand Bender

Hilmor Stand Bender

Hilmor 15 - 35mm Stand Bender

A portable pipe bender to cover tube of 15-35 mm.

Operators Manual

Operators Manual

Recommended PPE

A portable pipe bender to cover tube of 15-35 mm.

More Information

Features:

15, 22, 28 and 35mm to BS2871.
A portable tube bender to cover tube of 15-35 mm
Can be used for copper, mild steel or stainless steel tube.
Capacity; 15 to 35 mm

,

Related Products

Hire

Hilmor 16 - 25mm Conduit Bender

Hilmor 16 - 25mm Conduit Bender

Conduit installation times are decimated and waste is significantly reduced.

Hire

Hilmor 15 - 22mm Scissor Bender

Hilmor 15 - 22mm Scissor Bender

A compact bender with precision high pressure aluminium die cast formers and guides to produce sets, offsets, multiple bends etc in tubes of a maximum diameter of 22 mm.

Hire

Rems Curvo 15 - 28mm 110v Bender

Rems Curvo 15 - 28mm 110v Bender

Universal, compact electric tool for cold bending of pipes and tubes up to 180 degrees. Can be used anywhere, without vice.

Hire

Ridgid Hydraulic Pipe Bender 1/2 Inch to 2 Inch

Ridgid Hydraulic Pipe Bender 1/2 Inch to 2 Inch

Versatile, portable benders, ideal for on-site bending as well as machine construction, boiler making and industrial applications in general.

Hilmor 15 - 42mm Stand Bender

Hilmor 15 - 42mm Stand Bender

IRWIN Hilmor universal tube bender is a very versatile tool suitable for plumbers, gas fitters, electricians etc.

Tubela 15-54mm Ratchet Assisted Copper Bender

Tubela 15-54mm Ratchet Assisted Copper Bender

For all your tube bending requirements for copper, stainless steel, aluminium, conduit, mild steel tube. Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.

Hilmor 16 - 25mm Conduit Bender

Hilmor 16 - 25mm Conduit Bender

Conduit installation times are decimated and waste is significantly reduced.

Tubela Rotary Scissor Bender 15-54mm Carbon Steel/Copper

Tubela Rotary Scissor Bender 15-54mm Carbon Steel/Copper

The Tubela H3PR is a hand operated 2" nb (60.3mmOD) capacity ram-press pipe bender for Gas or Black pipe, but also for bending thicker wall hydraulic steel and stainless steel tubes that are being increasingly used in industry where higher pressures and temperatures are required. Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

Scorp Cutter 8 Inch to 14 Inch 110v Square Cut

Scorp Cutter 8 Inch to 14 Inch 110v Square Cut

The ultimate and fast solution for cutting of cast iron, stainless steel, steel, copper, aluminum and plastic pipes.

Rubber Drain Test Bags 2 Inch to 6 Inch

Rubber Drain Test Bags 2 Inch to 6 Inch

Ideal for air testing pipe systems.

Ridgid 468 Hinged 4 Wheel Cutters 6 Inch to 8 Inch

Ridgid 468 Hinged 4 Wheel Cutters 6 Inch to 8 Inch

Designed for rapid cutting of steel pipe and heavy-wall steel pipe.

Back to Pipe Fitting

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools