Hilmor 16 - 25mm Conduit Bender

Hilmor 16 - 25mm Conduit Bender

Hilmor Conduit Bender

Hilmor 16 - 25mm Conduit Bender

Conduit installation times are decimated and waste is significantly reduced.

Operators Manual

Operators Manual

Recommended PPE

Conduit installation times are decimated and waste is significantly reduced.

Additional Information

Features:

Easy quick installations in galvanised and black enamel conduit.
Conduit installation times are decimated and waste is significantly reduced.
Complete with vice.
2 models available: EL25 / EL32

,

Related Products

Hire

Tubela 15-54mm Ratchet Assisted Copper Bender

Tubela 15-54mm Ratchet Assisted Copper Bender

For all your tube bending requirements for copper, stainless steel, aluminium, conduit, mild steel tube. Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.

Hire

Rems Curvo 50 Bending Tool 32-50MM

Rems Curvo 50 Bending Tool 32-50MM

Universal, compact electric tool for cold bending of pipes and tubes up to 90 degrees. Can be used anywhere, without vice.

Hire

Ridgid Electric Pipe Bender 1/2 Inch to 3 Inch

Ridgid Electric Pipe Bender 1/2 Inch to 3 Inch

Versatile, portable benders, ideal for on-site bending as well as machine construction, boiler making and industrial applications in general.

Hire

Tubela Rotary Scissor Bender 15-54mm Carbon Steel/Copper

Tubela Rotary Scissor Bender 15-54mm Carbon Steel/Copper

The Tubela H3PR is a hand operated 2" nb (60.3mmOD) capacity ram-press pipe bender for Gas or Black pipe, but also for bending thicker wall hydraulic steel and stainless steel tubes that are being increasingly used in industry where higher pressures and temperatures are required. Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.

Hilmor 15 - 42mm Stand Bender

Hilmor 15 - 42mm Stand Bender

IRWIN Hilmor universal tube bender is a very versatile tool suitable for plumbers, gas fitters, electricians etc.

Rems Curvo 50 Bending Tool 32-50MM

Rems Curvo 50 Bending Tool 32-50MM

Universal, compact electric tool for cold bending of pipes and tubes up to 90 degrees. Can be used anywhere, without vice.

Rems Python Hydraulic 32 - 63mm/Multi-layer Composite Pipe

Rems Python Hydraulic 32 - 63mm/Multi-layer Composite Pipe

Robust, hydraulic pipe bender for dimensionally accurate bending of pipes up to 90 degrees.

Hilmor 15 - 22mm Scissor Bender

Hilmor 15 - 22mm Scissor Bender

A compact bender with precision high pressure aluminium die cast formers and guides to produce sets, offsets, multiple bends etc in tubes of a maximum diameter of 22 mm.

Drain Bungs 1 Inch to 6 Inch

Drain Bungs 1 Inch to 6 Inch

Drain Bungs isolate and seal sections of drain during testing or repair.

RX Roller Set Carbon SCH 10 and Below

RX Roller Set Carbon SCH 10 and Below

RX Roller Set Carbon SCH 10 and Below.

4 Inch Axxair Cutter C/W Bench

4 Inch Axxair Cutter C/W Bench

The Axxair cutter offers cutting without tube deformation and is ideal for thin wall stainless tubes and pipes. It provides a cut of quality geometry leaving a good surface condition.

REMS Tiger SR Electric Reciprocating Pipe Saw

REMS Tiger SR Electric Reciprocating Pipe Saw

REMS Tiger SR - Saws effortless, fast, right angle. Electronic stroke speed. Robust and handy.

Back to Pipe Fitting

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools