Hilmor 16 - 25mm Conduit Bender

Hilmor 16 - 25mm Conduit Bender

Hilmor Conduit Bender

Hilmor 16 - 25mm Conduit Bender

Conduit installation times are decimated and waste is significantly reduced.

Operators Manual

Operators Manual

Recommended PPE

Conduit installation times are decimated and waste is significantly reduced.

Additional Information

Features:

Easy quick installations in galvanised and black enamel conduit.
Conduit installation times are decimated and waste is significantly reduced.
Complete with vice.
2 models available: EL25 / EL32

,

Related Products

Hire

Rems Curvo 15 - 28mm 110v Bender

Rems Curvo 15 - 28mm 110v Bender

Universal, compact electric tool for cold bending of pipes and tubes up to 180 degrees. Can be used anywhere, without vice.

Hire

Hilmor 15 - 35mm Stand Bender

Hilmor 15 - 35mm Stand Bender

A portable pipe bender to cover tube of 15-35 mm.

Hire

Hilmor 15 - 42mm Stand Bender

Hilmor 15 - 42mm Stand Bender

IRWIN Hilmor universal tube bender is a very versatile tool suitable for plumbers, gas fitters, electricians etc.

Hire

Tubela 15-54mm Ratchet Assisted Copper Bender

Tubela 15-54mm Ratchet Assisted Copper Bender

For all your tube bending requirements for copper, stainless steel, aluminium, conduit, mild steel tube. Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.

Hilmor 15 - 35mm Stand Bender

Hilmor 15 - 35mm Stand Bender

A portable pipe bender to cover tube of 15-35 mm.

Tubela Rotary Scissor Bender 15-54mm Carbon Steel/Copper

Tubela Rotary Scissor Bender 15-54mm Carbon Steel/Copper

The Tubela H3PR is a hand operated 2" nb (60.3mmOD) capacity ram-press pipe bender for Gas or Black pipe, but also for bending thicker wall hydraulic steel and stainless steel tubes that are being increasingly used in industry where higher pressures and temperatures are required. Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.

Tubela 15-54mm Ratchet Assisted Copper Bender

Tubela 15-54mm Ratchet Assisted Copper Bender

For all your tube bending requirements for copper, stainless steel, aluminium, conduit, mild steel tube. Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.

Hilmor 15 - 22mm Scissor Bender

Hilmor 15 - 22mm Scissor Bender

A compact bender with precision high pressure aluminium die cast formers and guides to produce sets, offsets, multiple bends etc in tubes of a maximum diameter of 22 mm.

Victaulic 272SFS Roll Grooving Machine 2 Inch to 8 Inch

Victaulic 272SFS Roll Grooving Machine 2 Inch to 8 Inch

Portable roll groover mounts easily to a Victaulic VPD752 or Rigid 300 power drive. Hand pump operation with a unique pivot arm design reduces handle effort. Tracking rolls reduce pipe walk-off. VE272SFS permitted for roll grooving thin wall carbon steel pipe 2 Inch to 12 Inch.

Ridgid 590L 14 Inch Dry Cut Saw

Ridgid 590L 14 Inch Dry Cut Saw

Ridgid 590L Dry Cut saw produces clean, virtually burr-free cuts on steel, copper, aluminium and plastics and an adjustable cutting angle 45 degrees - 90 degrees. Cuts Steel Tube up to 130mm and 115mm Box Section

Hilmor 15 - 42mm Stand Bender

Hilmor 15 - 42mm Stand Bender

IRWIN Hilmor universal tube bender is a very versatile tool suitable for plumbers, gas fitters, electricians etc.

Ridgid 1450 Hand Pressure Test Pump Max. 725PSI / 50BAR

Ridgid 1450 Hand Pressure Test Pump Max. 725PSI / 50BAR

The 1450 Pressure Test Pump tests hydraulically for leaks in installations which are required to be leak proof and will test systems up to 725 PSI. Especially for use in heating, compressed air, refrigeration systems, oil installations, sprinkler systems and other small bore pipe installations.

Back to Pipe Fitting

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools