Manual T Drill for Copper 15 - 42mm

Manual T Drill for Copper 15 - 42mm

Manual Tee- Extractor For Copper

Manual T Drill for Copper 15 - 42mm

Tee Extractor.

Operators Manual

Operators Manual

Recommended PPE

Tee Extractor.

Additional Information

Rothenberger Tee-Extractor Set

Capacity: 15-42mm

Type Of Set: Manual

Standard Equipment:
1 X Tee-Extractor Set, Inc: 1 X Unidrill,
1x Ratchet, 1 X Cam Pincer,
1 X Extractors, 15-42mm.

,

Related Products

Hire

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

Hire

T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a portable tee forming machine for copper tubes. It is an ideal solution for making tee joints in main run tube.

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a portable tee forming machine for copper tubes. It is an ideal solution for making tee joints in main run tube.

Tubela Rotary Scissor Bender 15-54mm Carbon Steel/Copper

Tubela Rotary Scissor Bender 15-54mm Carbon Steel/Copper

The Tubela H3PR is a hand operated 2" nb (60.3mmOD) capacity ram-press pipe bender for Gas or Black pipe, but also for bending thicker wall hydraulic steel and stainless steel tubes that are being increasingly used in industry where higher pressures and temperatures are required. Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.

Ridgid Additional Die Head

Ridgid Additional Die Head

Additional Die Head.

Rems Curvo 15 - 28mm 110v Bender

Rems Curvo 15 - 28mm 110v Bender

Universal, compact electric tool for cold bending of pipes and tubes up to 180 degrees. Can be used anywhere, without vice.

Victaulic 272SFS Roll Grooving Machine 2 Inch to 8 Inch C/W 300C Power Drive and Tristand

Victaulic 272SFS Roll Grooving Machine 2 Inch to 8 Inch C/W 300C Power Drive and Tristand

Portable roll groover mounts easily to a Victaulic VPD752 or Rigid 300 power drive. Hand pump operation with a unique pivot arm design reduces handle effort. Tracking rolls reduce pipe walk-off. VE272SFS permitted for roll grooving thin wall carbon steel pipe 2 Inch to 12 Inch.

Back to Pipe Fitting

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools