Manual T Drill for Copper 15 - 42mm

Manual T Drill for Copper 15 - 42mm

Manual Tee- Extractor For Copper

Manual T Drill for Copper 15 - 42mm

Tee Extractor.

Operators Manual

Operators Manual

Recommended PPE

Tee Extractor.

Additional Information

Rothenberger Tee-Extractor Set

Capacity: 15-42mm

Type Of Set: Manual

Standard Equipment:
1 X Tee-Extractor Set, Inc: 1 X Unidrill,
1x Ratchet, 1 X Cam Pincer,
1 X Extractors, 15-42mm.

,

Related Products

Hire

T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a portable tee forming machine for copper tubes. It is an ideal solution for making tee joints in main run tube.

Hire

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a portable tee forming machine for copper tubes. It is an ideal solution for making tee joints in main run tube.

8 Inch Axxair Cutter C/W Bench

8 Inch Axxair Cutter C/W Bench

The Axxair cutter offers cutting without tube deformation and is ideal for thin wall stainless tubes and pipes. It provides a cut of quality geometry leaving a good surface condition.

10 Inch Pulling Tool

10 Inch Pulling Tool

With the pulling tool no blocks, chains or machinery are needed and all operations can be carried out by one man. Simply place the tool on the pipes and pull them together.

REMS Eskimo CO2 Kit 10 - 60mm

REMS Eskimo CO2 Kit 10 - 60mm

Easy, fast freezing of pipes which are not drained, with CFC-free refrigerant carbon dioxide. For repair, extensions of piping systems.

Rems Curvo 50 Bending Tool 32-50MM

Rems Curvo 50 Bending Tool 32-50MM

Universal, compact electric tool for cold bending of pipes and tubes up to 90 degrees. Can be used anywhere, without vice.

Back to Pipe Fitting

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools