Manual T Drill for Copper 15 - 42mm

Manual T Drill for Copper 15 - 42mm

Manual Tee- Extractor For Copper

Manual T Drill for Copper 15 - 42mm

Tee Extractor.

Operators Manual

Operators Manual

Recommended PPE

Tee Extractor.

Additional Information

Rothenberger Tee-Extractor Set

Capacity: 15-42mm

Type Of Set: Manual

Standard Equipment:
1 X Tee-Extractor Set, Inc: 1 X Unidrill,
1x Ratchet, 1 X Cam Pincer,
1 X Extractors, 15-42mm.

,

Related Products

Hire

T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a portable tee forming machine for copper tubes. It is an ideal solution for making tee joints in main run tube.

Hire

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a portable tee forming machine for copper tubes. It is an ideal solution for making tee joints in main run tube.

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

Ridgid 141 Receeder 2 1/2 Inch to 4 Inch

Ridgid 141 Receeder 2 1/2 Inch to 4 Inch

Upgrades Ridgid 300 to 2 1/2 Inch - 4 Inch.

Ridgid 258 Hydraulic/Powered Pipe Cutter 2 1/2 Inch to 8 Inch

Ridgid 258 Hydraulic/Powered Pipe Cutter 2 1/2 Inch to 8 Inch

The RIDGID Model 258 Power Pipe Cutter cuts 2 1/2 Inch (65 mm) to 8 Inch (200 mm) schedule 10*/40 steel pipe, galvanized pipe, rigid conduit, etc. Powered by the RIDGID No. 700 Power Drive (110v) or Ridgid 760 FXP Power Drive (60v cordless) , the 258 is a displacement cutter that provides square cuts.

Ridgid HC450 Hole Cutter for Mechanical Tees

Ridgid HC450 Hole Cutter for Mechanical Tees

The HC450 is ideal for mechanical, industrial maintenance and fire protection contractors since it cuts holes into a wide variety of pipe materials.

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

A versatile and lightweight machine that can extend its threading ability up to 6 Inch by using either a 141 or 161 geared threader.

Back to Pipe Fitting

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools