Manual T Drill for Copper 15 - 42mm

Manual T Drill for Copper 15 - 42mm

Manual Tee- Extractor For Copper

Manual T Drill for Copper 15 - 42mm

Tee Extractor.

Operators Manual

Operators Manual

Recommended PPE

Tee Extractor.

Additional Information

Rothenberger Tee-Extractor Set

Capacity: 15-42mm

Type Of Set: Manual

Standard Equipment:
1 X Tee-Extractor Set, Inc: 1 X Unidrill,
1x Ratchet, 1 X Cam Pincer,
1 X Extractors, 15-42mm.

,

Related Products

Hire

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

Hire

T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a portable tee forming machine for copper tubes. It is an ideal solution for making tee joints in main run tube.

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a portable tee forming machine for copper tubes. It is an ideal solution for making tee joints in main run tube.

6 Inch Axxair Cutter C/W Bench

6 Inch Axxair Cutter C/W Bench

The Axxair cutter offers cutting without tube deformation and is ideal for thin wall stainless tubes and pipes. It provides a cut of quality geometry leaving a good surface condition.

7.5 CFM Compressor 115 PS1 C/W Hose and 1/2 Inch BSP Bush

7.5 CFM Compressor 115 PS1 C/W Hose and 1/2 Inch BSP Bush

High output with compact dimensions makes this tough piston compressor especially handy for on-site tasks involving fixing, spraying, inflating and dust / debris blowing.

3.5 CFM Compressor 115 PS1 C/W Hose & 1/2 Inch BSP Bush

3.5 CFM Compressor 115 PS1 C/W Hose & 1/2 Inch BSP Bush

This 3.5 CFM compressor compact model incorporates features found on much larger professional machines.

Rems Curvo 15 - 28mm 110v Bender

Rems Curvo 15 - 28mm 110v Bender

Universal, compact electric tool for cold bending of pipes and tubes up to 180 degrees. Can be used anywhere, without vice.

Back to Pipe Fitting

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools