Pipe Threading Machines

Nipple Chuck

Ridgid Nipple Chuck

Ridgid

Nipple Chuck

Holds short or close nipples for threading.

Operators Manual

Operators Manual

Recommended PPE

Holds short or close nipples for threading.

More Information

Features

Holds short or close nipples for threading.
For use with 300 Power Drive, 300 Compact, 535 and 1822 (with adapter kit) and 1224 Threading Machines.

,

Related Products

Hire

Rems Python Hydraulic 32 - 63mm/Multi-layer Composite Pipe

Rems Python Hydraulic 32 - 63mm/Multi-layer Composite Pipe

Robust, hydraulic pipe bender for dimensionally accurate bending of pipes up to 90 degrees.

Hire

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

A versatile and lightweight machine that can extend its threading ability up to 6 Inch by using either a 141 or 161 geared threader.

Hire

RX Roller Set Carbon SCH 10 and Below

RX Roller Set Carbon SCH 10 and Below

RX Roller Set Carbon SCH 10 and Below.

Hire

Ridgid Stud Cutter 8MM

Ridgid Stud Cutter 8MM

The 1390 Threaded Rod Cutter is designed to cut threaded rods used to hang pipes for air conditioning, sprinkler installations and other lightweight frames from the ceiling. Makes clean cuts without damaging thread.

7.5 CFM Compressor 115 PS1 C/W Hose and 1/2 Inch BSP Bush

7.5 CFM Compressor 115 PS1 C/W Hose and 1/2 Inch BSP Bush

High output with compact dimensions makes this tough piston compressor especially handy for on-site tasks involving fixing, spraying, inflating and dust / debris blowing.

Ridgid 6S Pipe Roller Cutter 4 Inch to 6 Inch

Ridgid 6S Pipe Roller Cutter 4 Inch to 6 Inch

For fast clean pipe cutting.

Rems Solar Push K60

Rems Solar Push K60

Self-suction centrifugal pump, suitable for different transport media, e.g. heat transfer liquids, antifreeze, water, aqueous solutions, emulsions. With proven, powerful condenser motor, quiet running, 860 W, on/off switch.

Hilti VC 40 UM, M class vacum

Hilti VC 40 UM, M class vacum

The Hilti VC40 is a Universal wet and dry vacuum cleaner with automatic filter cleaning. It has a tank capacity of 36 litres.

Ridgid 46 Pipe Support

Ridgid 46 Pipe Support

Ideal for use with threading machines, roll grooving, or other pipe working applications.

Machine Guards

Machine Guards keep pedestrians away from moving pipe on threading equipment.

Ridgid 161 Receeder 4 Inch to 6 Inch

Ridgid 161 Receeder 4 Inch to 6 Inch

Increases capacity of 2 Inch or 3 Inch threader to 4 Inch.

Drip Tray

For use under machines to protect floors etc.

Back to Pipe Threading Machines

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools