Pipe Threading Machines

Nipple Chuck

Ridgid Nipple Chuck

Ridgid

Nipple Chuck

Holds short or close nipples for threading.

Operators Manual

Operators Manual

Recommended PPE

Holds short or close nipples for threading.

More Information

Features

Holds short or close nipples for threading.
For use with 300 Power Drive, 300 Compact, 535 and 1822 (with adapter kit) and 1224 Threading Machines.

,

Related Products

Hire

RX Roller Set Stainless Steel SCH 10 and Below

RX Roller Set Stainless Steel SCH 10 and Below

RX Roller Set to suit stainless steel SCH 10 and below.

Hire

Rex Threading Machine 1/2 Inch to 4 Inch NPT c/w Pipe Support

Rex Threading Machine 1/2 Inch to 4 Inch NPT c/w Pipe Support

Rex Threading Machine N100A.

Hire

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

Hire

3.5 CFM Compressor 115 PS1 C/W Hose & 1/2 Inch BSP Bush

3.5 CFM Compressor 115 PS1 C/W Hose & 1/2 Inch BSP Bush

This 3.5 CFM compressor compact model incorporates features found on much larger professional machines.

Rems Python Hydraulic 32 - 63mm/Multi-layer Composite Pipe

Rems Python Hydraulic 32 - 63mm/Multi-layer Composite Pipe

Robust, hydraulic pipe bender for dimensionally accurate bending of pipes up to 90 degrees.

Ridgid 1450 Hand Pressure Test Pump Max. 725PSI / 50BAR

Ridgid 1450 Hand Pressure Test Pump Max. 725PSI / 50BAR

The 1450 Pressure Test Pump tests hydraulically for leaks in installations which are required to be leak proof and will test systems up to 725 PSI. Especially for use in heating, compressed air, refrigeration systems, oil installations, sprinkler systems and other small bore pipe installations.

6 Inch Pulling Tool

6 Inch Pulling Tool

With the pulling tool no blocks, chains or machinery are needed and all operations can be carried out by one man. Simply place the tool on the pipes and pull them together.

GF Cut & Bevel Machine RA4 1/2 Inch to 4 Inch C/W Bench

GF Cut & Bevel Machine RA4 1/2 Inch to 4 Inch C/W Bench

The GF Cut and Bevel Machine offers many advantages including multiple point clamping, fast adjustment of dimensions and regulated cutting speed.

Drip Tray

For use under machines to protect floors etc.

Ridgid 161 Receeder 4 Inch to 6 Inch

Ridgid 161 Receeder 4 Inch to 6 Inch

Increases capacity of 2 Inch or 3 Inch threader to 4 Inch.

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP c/w Pipe Support

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP c/w Pipe Support

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP C/W Die Heads and Pipe Support.

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

A versatile and lightweight machine that can extend its threading ability up to 6 Inch by using either a 141 or 161 geared threader.

Back to Pipe Threading Machines

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools