Rems Curvo 15 - 28mm 110v Bender

Rems Curvo 15 - 28mm 110v Bender

Rems Curvo

Rems Curvo 15 - 28mm 110v Bender

Universal, compact electric tool for cold bending of pipes and tubes up to 180 degrees. Can be used anywhere, without vice.

Operators Manual

Operators Manual

Recommended PPE

Universal, compact electric tool for cold bending of pipes and tubes up to 180 degrees. Can be used anywhere, without vice.

More Information

Features:

Wrinkle-free bending
Universal for many pipes and tubes.
Instant use without setting.
Fast and creep speed operation for precise bending.
Quick change of bending and back formers.

,

Related Products

Hire

Tubela 15-54mm Ratchet Assisted Copper Bender

Tubela 15-54mm Ratchet Assisted Copper Bender

For all your tube bending requirements for copper, stainless steel, aluminium, conduit, mild steel tube. Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.

Hire

Hilmor 15 - 22mm Scissor Bender

Hilmor 15 - 22mm Scissor Bender

A compact bender with precision high pressure aluminium die cast formers and guides to produce sets, offsets, multiple bends etc in tubes of a maximum diameter of 22 mm.

Hire

Ridgid Hydraulic Pipe Bender 1/2 Inch to 2 Inch

Ridgid Hydraulic Pipe Bender 1/2 Inch to 2 Inch

Versatile, portable benders, ideal for on-site bending as well as machine construction, boiler making and industrial applications in general.

Hire

Rems Python Hydraulic 32 - 63mm/Multi-layer Composite Pipe

Rems Python Hydraulic 32 - 63mm/Multi-layer Composite Pipe

Robust, hydraulic pipe bender for dimensionally accurate bending of pipes up to 90 degrees.

Rems Python Hydraulic 32 - 63mm/Multi-layer Composite Pipe

Rems Python Hydraulic 32 - 63mm/Multi-layer Composite Pipe

Robust, hydraulic pipe bender for dimensionally accurate bending of pipes up to 90 degrees.

Hilmor 16 - 25mm Conduit Bender

Hilmor 16 - 25mm Conduit Bender

Conduit installation times are decimated and waste is significantly reduced.

Rems Curvo 50 Bending Tool 32-50MM

Rems Curvo 50 Bending Tool 32-50MM

Universal, compact electric tool for cold bending of pipes and tubes up to 90 degrees. Can be used anywhere, without vice.

Hilmor 15 - 22mm Scissor Bender

Hilmor 15 - 22mm Scissor Bender

A compact bender with precision high pressure aluminium die cast formers and guides to produce sets, offsets, multiple bends etc in tubes of a maximum diameter of 22 mm.

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

Ridgid 915 Portable Roll Groover 2 Inch to 6 Inch

Ridgid 915 Portable Roll Groover 2 Inch to 6 Inch

The RIDGID 915 Roll Groover is a manual roll groover for in-place field applications.

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

A versatile and lightweight machine that can extend its threading ability up to 6 Inch by using either a 141 or 161 geared threader.

6 Inch Axxair Cutter C/W Bench

6 Inch Axxair Cutter C/W Bench

The Axxair cutter offers cutting without tube deformation and is ideal for thin wall stainless tubes and pipes. It provides a cut of quality geometry leaving a good surface condition.

Back to Pipe Fitting

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools