Rems Curvo 50 Bending Tool 32-50MM

Rems Curvo 50 Bending Tool 32-50MM

Rems Curvo

Rems Curvo 50 Bending Tool 32-50MM

Universal, compact electric tool for cold bending of pipes and tubes up to 90 degrees. Can be used anywhere, without vice.

Operators Manual

Operators Manual

Recommended PPE

Universal, compact electric tool for cold bending of pipes and tubes up to 90 degrees. Can be used anywhere, without vice.

Additional Information

Features:

wrinkle free bending of large pipes.
Instant use without setting.
Fast and creep speed operation for precise bending.
Rapid change of bending and back formers.

,

Related Products

Hire

Ridgid 916 Roll Groover 1 Inch Only

Ridgid 916 Roll Groover 1 Inch Only

The RIDGID Model 916 Roll Groover is the most durable and efficient lightweight portable unit available. Built with a solid, durable cast-iron housing, it withstands heavy usage, yet is light enough for easy transportation.

Hire

Ridgid 161 Receeder 4 Inch to 6 Inch

Ridgid 161 Receeder 4 Inch to 6 Inch

Increases capacity of 2 Inch or 3 Inch threader to 4 Inch.

Hire

Ridgid 1450 Hand Pressure Test Pump Max. 725PSI / 50BAR

Ridgid 1450 Hand Pressure Test Pump Max. 725PSI / 50BAR

The 1450 Pressure Test Pump tests hydraulically for leaks in installations which are required to be leak proof and will test systems up to 725 PSI. Especially for use in heating, compressed air, refrigeration systems, oil installations, sprinkler systems and other small bore pipe installations.

Hire

Expansion Kit 65 - 88mm

Expansion Kit 65 - 88mm

This kit adapts 61mm machines to freeze 2½" - 3" ID Steel pipes (76mm & 88mm OD).

Rems Solar Push K60

Rems Solar Push K60

Self-suction centrifugal pump, suitable for different transport media, e.g. heat transfer liquids, antifreeze, water, aqueous solutions, emulsions. With proven, powerful condenser motor, quiet running, 860 W, on/off switch.

RX Roller Set Stainless Steel SCH 10 and Below

RX Roller Set Stainless Steel SCH 10 and Below

RX Roller Set to suit stainless steel SCH 10 and below.

Ridgid 258 Hydraulic/Powered Pipe Cutter 2 1/2 Inch to 8 Inch

Ridgid 258 Hydraulic/Powered Pipe Cutter 2 1/2 Inch to 8 Inch

The RIDGID Model 258 Power Pipe Cutter cuts 2 1/2 Inch (65 mm) to 8 Inch (200 mm) schedule 10*/40 steel pipe, galvanized pipe, rigid conduit, etc. Powered by the RIDGID No. 700 Power Drive (110v) or Ridgid 760 FXP Power Drive (60v cordless) , the 258 is a displacement cutter that provides square cuts.

REMS Multipush SLW Flushing Air and Water Test Pump

REMS Multipush SLW Flushing Air and Water Test Pump

Powerful, compact, electronic flushing and pressure testing unit with oil-free compressor.

Rems Cento Pipe Cutter 22-108mm

Rems Cento Pipe Cutter 22-108mm

Mapress Copper Kit 4 42-54MM

Mapress Copper Kit 4 42-54MM

This kit comprises of a Novopress 42 and 54mm Adaptor Kit to suit a Novopress press tool suitable for Geberit copper press fittings.

Mapress Steel Kit 2 15-35MM

Mapress Steel Kit 2 15-35MM

This kit comprises of a Novopress cordless press tool (ACO203) complete with 15-35mm jaws suitable for Geberit carbon and stainless steel press fittings.

Viega Megapress XL – Press Booster Kit

Viega Megapress XL – Press Booster Kit

Viega Megapress XL – Press Booster Kit – supplied with 2 ½” pressing jaw for steel tube as standard (3” & 4” pressing jaws supplied separately)

Back to Press Fitting

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools