Pipe Threading Machines

Ridgid 161 Receeder 4 Inch to 6 Inch

Ridgid 161 Receeder 4 Inch to 6 Inch

161 Threeder

Ridgid

Ridgid 161 Receeder 4 Inch to 6 Inch

Increases capacity of 2 Inch or 3 Inch threader to 4 Inch.

Operators Manual

Operators Manual

Recommended PPE

Increases capacity of 2 Inch or 3 Inch threader to 4 Inch.

More Information

Use– Accessory for Ridgid 300
Capacity– 4 Inch to 6 Inch
Optional Extras– Ratchet arm for manual in-situ threading, Pipe Support

Features

Jaw clutch prevents jamming.
Simple adjustment for tapered or straight threads.
Cam-type workholder sets instantly.
Fully enclosed gearing.
Right-hand only

,

Related Products

Hire

Ridgid 918 Roll Groover, Power Drive & Pipe Support

Ridgid 918 Roll Groover, Power Drive & Pipe Support

The RIDGID Model 918 Hydraulic Roll Groover features a powerful 15-ton hydraulic ram in a compact, easy to transport unit. With one man set-up and operation, the 918 is the ideal groover for job site requirements.

Hire

Drip Tray

For use under machines to protect floors etc.

Hire

Victaulic RG3600 Pipe Roll Grooving Tool StrengThin 100

Victaulic RG3600 Pipe Roll Grooving Tool StrengThin 100

The Victaulic RG3600 Pipe Roll Grooving Tool is a Portable lightweight field groover designed to groove 2" - 12" light wall stainless steel for StrengThin 100.

Hire

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

Rems Solar Push K60

Rems Solar Push K60

Self-suction centrifugal pump, suitable for different transport media, e.g. heat transfer liquids, antifreeze, water, aqueous solutions, emulsions. With proven, powerful condenser motor, quiet running, 860 W, on/off switch.

Ridgid 918 Hydraulic Groover Supplied 8 Inch to 12 Inch

Ridgid 918 Hydraulic Groover Supplied 8 Inch to 12 Inch

The RIDGID Model 918 Hydraulic Roll Groover features a powerful 15-ton hydraulic ram in a compact, easy to transport unit. With one man set-up and operation, the 918 is the ideal groover for job site requirements.

Ridgid 460 Tripod Vice 6 Inch Capacity

Ridgid 460 Tripod Vice 6 Inch Capacity

Ridgid Tripod Vices feature integral folding legs for easy transport and setup, tool hangers and a base which overhangs the front legs for clear tool swing.

Ridgid Stud Cutter 8MM

Ridgid Stud Cutter 8MM

The 1390 Threaded Rod Cutter is designed to cut threaded rods used to hang pipes for air conditioning, sprinkler installations and other lightweight frames from the ceiling. Makes clean cuts without damaging thread.

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP c/w Pipe Support

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP c/w Pipe Support

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP C/W Die Heads and Pipe Support.

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

A versatile and lightweight machine that can extend its threading ability up to 6 Inch by using either a 141 or 161 geared threader.

Rex Threading Machine 1/2 Inch to 4 Inch BSP c/w Pipe Support

Rex Threading Machine 1/2 Inch to 4 Inch BSP c/w Pipe Support

Rex Threading Machine N100A.

Drip Tray

For use under machines to protect floors etc.

Back to Pipe Threading Machines

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools