Pipe Threading Machines

Ridgid 46 Pipe Support

Ridgid 46 Pipe Support

Ridgid 46 Pipe Support

Ridgid

Ridgid 46 Pipe Support

Ideal for use with threading machines, roll grooving, or other pipe working applications.

Operators Manual

Operators Manual

Recommended PPE

Ideal for use with threading machines, roll grooving, or other pipe working applications.

Additional Information

Features:

Adjustable Pipe support
Ideal for use with threading machines, roll grooving, or other pipe working applications

,

Related Products

Hire

Rems Solar Push K60

Rems Solar Push K60

Self-suction centrifugal pump, suitable for different transport media, e.g. heat transfer liquids, antifreeze, water, aqueous solutions, emulsions. With proven, powerful condenser motor, quiet running, 860 W, on/off switch.

Hire

Fein Reciprocating Pipe Saw 100mm to 325mm C/W Clamp

Fein Reciprocating Pipe Saw 100mm to 325mm C/W Clamp

Hacksaw for pipes and profiled sections.

Hire

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

Hire

AGS Roller Set 14 Inch to 16 Inch for use on VE416 FSD

AGS Roller Set 14 Inch to 16 Inch for use on VE416 FSD

AGS Roller Set 14 Inch to 16 Inch for use on VE416 FSD.

Ridgid 915 Insitu Portable Roll Groover Rollers 1 1/4in to 1 1/2in

Ridgid 915 Insitu Portable Roll Groover Rollers 1 1/4in to 1 1/2in

The RIDGID 915 Roll Groover is a manual roll groover for in-place field applications.

6 Inch Axxair Cutter C/W Bench

6 Inch Axxair Cutter C/W Bench

The Axxair cutter offers cutting without tube deformation and is ideal for thin wall stainless tubes and pipes. It provides a cut of quality geometry leaving a good surface condition.

Expansion Kit 65 - 88mm

Expansion Kit 65 - 88mm

This kit adapts 61mm machines to freeze 2½" - 3" ID Steel pipes (76mm & 88mm OD).

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

Ridgid 141 Receeder 2 1/2 Inch to 4 Inch

Ridgid 141 Receeder 2 1/2 Inch to 4 Inch

Upgrades Ridgid 300 to 2 1/2 Inch - 4 Inch.

Ridgid 161 Receeder 4 Inch to 6 Inch

Ridgid 161 Receeder 4 Inch to 6 Inch

Increases capacity of 2 Inch or 3 Inch threader to 4 Inch.

Nipple Chuck

Holds short or close nipples for threading.

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

A versatile and lightweight machine that can extend its threading ability up to 6 Inch by using either a 141 or 161 geared threader.

Back to Pipe Threading Machines

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools