Pipe Threading Machines

Ridgid 46 Pipe Support

Ridgid 46 Pipe Support

Ridgid 46 Pipe Support

Ridgid

Ridgid 46 Pipe Support

Ideal for use with threading machines, roll grooving, or other pipe working applications.

Operators Manual

Operators Manual

Recommended PPE

Ideal for use with threading machines, roll grooving, or other pipe working applications.

Additional Information

Features:

Adjustable Pipe support
Ideal for use with threading machines, roll grooving, or other pipe working applications

,

Related Products

Hire

T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a portable tee forming machine for copper tubes. It is an ideal solution for making tee joints in main run tube.

Hire

RX Roller Set Stainless Steel SCH 10 and Below

RX Roller Set Stainless Steel SCH 10 and Below

RX Roller Set to suit stainless steel SCH 10 and below.

Hire

Ridgid 258 Hydraulic/Powered Pipe Cutter 2 1/2 Inch to 8 Inch

Ridgid 258 Hydraulic/Powered Pipe Cutter 2 1/2 Inch to 8 Inch

The RIDGID Model 258 Power Pipe Cutter cuts 2 1/2 Inch (65 mm) to 8 Inch (200 mm) schedule 10*/40 steel pipe, galvanized pipe, rigid conduit, etc. Powered by the RIDGID No. 700 Power Drive (110v) or Ridgid 760 FXP Power Drive (60v cordless) , the 258 is a displacement cutter that provides square cuts.

Hire

Ridgid 258XL Hydraulic/Powered Pipe Cutter 8 Inch to 12 Inch

Ridgid 258XL Hydraulic/Powered Pipe Cutter 8 Inch to 12 Inch

The RIDGID 258XL offers 8 Inch (200 mm) to 12 Inch (300 mm) diameter pipe cutting capacity. Powered by the RIDGID No. 700 Power Drive (110v) or Ridgid 760 FXP Power Drive (60v cordless) , the 258XL is a displacement cutter that provides square cuts.

Ridgid 915 Insitu Portable Roll Groover Rollers 1 1/4in to 1 1/2in

Ridgid 915 Insitu Portable Roll Groover Rollers 1 1/4in to 1 1/2in

The RIDGID 915 Roll Groover is a manual roll groover for in-place field applications.

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

Tubela 15-54mm Ratchet Assisted Copper Bender

Tubela 15-54mm Ratchet Assisted Copper Bender

For all your tube bending requirements for copper, stainless steel, aluminium, conduit, mild steel tube. Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.

Nipple Chuck

Holds short or close nipples for threading.

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

A versatile and lightweight machine that can extend its threading ability up to 6 Inch by using either a 141 or 161 geared threader.

Ridgid 161 Receeder 4 Inch to 6 Inch

Ridgid 161 Receeder 4 Inch to 6 Inch

Increases capacity of 2 Inch or 3 Inch threader to 4 Inch.

Rex Threading Machine 1/2 Inch to 4 Inch NPT c/w Pipe Support

Rex Threading Machine 1/2 Inch to 4 Inch NPT c/w Pipe Support

Rex Threading Machine N100A.

Drip Tray

For use under machines to protect floors etc.

Back to Pipe Threading Machines

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools