Ridgid Roll Grooving Equipment

Ridgid 918 Stabilizer Kit

Ridgid 918 Stabilizer Kit

918 Stabilizer Kit

Ridgid

Ridgid 918 Stabilizer Kit

Stabilizer kit to be used in conjunction with the Ridgid 918 Groover.

Operators Manual

Operators Manual

Recommended PPE

Stabilizer kit to be used in conjunction with the Ridgid 918 Groover.

Additional Information

Features:

Stabilizer kit to be used in conjunction with the Ridgid 918 Groover

,

Related Products

Hire

Ridgid Stud Cutter 10MM

Ridgid Stud Cutter 10MM

The 1390 Threaded Rod Cutter is designed to cut threaded rods used to hang pipes for air conditioning, sprinkler installations and other lightweight frames from the ceiling. Makes clean cuts without damaging thread.

Hire

Chain Wrench 12/24 Inch

Chain Wrench 12/24 Inch

Designed and sized to provide extra leverage for the toughest jobs.

Hire

6 Inch Axxair Cutter C/W Bench

6 Inch Axxair Cutter C/W Bench

The Axxair cutter offers cutting without tube deformation and is ideal for thin wall stainless tubes and pipes. It provides a cut of quality geometry leaving a good surface condition.

Hire

T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a portable tee forming machine for copper tubes. It is an ideal solution for making tee joints in main run tube.

Ridgid 918 Roll Groover, Power Drive & Pipe Support

Ridgid 918 Roll Groover, Power Drive & Pipe Support

The RIDGID Model 918 Hydraulic Roll Groover features a powerful 15-ton hydraulic ram in a compact, easy to transport unit. With one man set-up and operation, the 918 is the ideal groover for job site requirements.

Ridgid 690 1/2 Inch to 2 Inch 110v Threader

Ridgid 690 1/2 Inch to 2 Inch 110v Threader

Ridgid 690 110v Threader for In -Situ Threading.

Scorp Cutter 1 Inch to 8 Inch 110v Square Cut

Scorp Cutter 1 Inch to 8 Inch 110v Square Cut

The ultimate and fast solution for cutting of cast iron, stainless steel, steel, copper, aluminum and plastic pipes.

Ridgid 1450 Hand Pressure Test Pump Max. 725PSI / 50BAR

Ridgid 1450 Hand Pressure Test Pump Max. 725PSI / 50BAR

The 1450 Pressure Test Pump tests hydraulically for leaks in installations which are required to be leak proof and will test systems up to 725 PSI. Especially for use in heating, compressed air, refrigeration systems, oil installations, sprinkler systems and other small bore pipe installations.

Ridgid HC450 Hole Cutter for Mechanical Tees

Ridgid HC450 Hole Cutter for Mechanical Tees

The HC450 is ideal for mechanical, industrial maintenance and fire protection contractors since it cuts holes into a wide variety of pipe materials.

Ridgid 915 Portable Roll Groover 2 Inch to 6 Inch

Ridgid 915 Portable Roll Groover 2 Inch to 6 Inch

The RIDGID 915 Roll Groover is a manual roll groover for in-place field applications.

Ridgid 916 Portable Roll Groover 2 Inch to 6 Inch Copper

Ridgid 916 Portable Roll Groover 2 Inch to 6 Inch Copper

The RIDGID Model 916 Roll Groover is the most durable and efficient lightweight portable unit available. Built with a solid, durable cast-iron housing, it withstands heavy usage, yet is light enough for easy transportation.

Ridgid 918 Hydraulic Groover Supplied 8 Inch to 12 Inch

Ridgid 918 Hydraulic Groover Supplied 8 Inch to 12 Inch

The RIDGID Model 918 Hydraulic Roll Groover features a powerful 15-ton hydraulic ram in a compact, easy to transport unit. With one man set-up and operation, the 918 is the ideal groover for job site requirements.

Back to Ridgid Roll Grooving Equipment

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools