Ridgid Roll Grooving Equipment

Ridgid 918 Stabilizer Kit

Ridgid 918 Stabilizer Kit

918 Stabilizer Kit

Ridgid

Ridgid 918 Stabilizer Kit

Stabilizer kit to be used in conjunction with the Ridgid 918 Groover.

Operators Manual

Operators Manual

Recommended PPE

Stabilizer kit to be used in conjunction with the Ridgid 918 Groover.

Additional Information

Features:

Stabilizer kit to be used in conjunction with the Ridgid 918 Groover

,

Related Products

Hire

Rems Solar Push K60

Rems Solar Push K60

Self-suction centrifugal pump, suitable for different transport media, e.g. heat transfer liquids, antifreeze, water, aqueous solutions, emulsions. With proven, powerful condenser motor, quiet running, 860 W, on/off switch.

Hire

Ridgid 590L 14 Inch Dry Cut Saw

Ridgid 590L 14 Inch Dry Cut Saw

Ridgid 590L Dry Cut saw produces clean, virtually burr-free cuts on steel, copper, aluminium and plastics and an adjustable cutting angle 45 degrees - 90 degrees. Cuts Steel Tube up to 130mm and 115mm Box Section

Hire

Electric Water Test Pump Max. 1500PSI / 100BAR

Electric Water Test Pump Max. 1500PSI / 100BAR

The Hilta Electric Water Test Pump has a maximum Flow of 3.4 Litres/Min and a maximum pressure 1500psi / 100bar.

Hire

12 Inch Pulling Tool

12 Inch Pulling Tool

With the pulling tool no blocks, chains or machinery are needed and all operations can be carried out by one man. Simply place the tool on the pipes and pull them together.

Rems Solar Push K60

Rems Solar Push K60

Self-suction centrifugal pump, suitable for different transport media, e.g. heat transfer liquids, antifreeze, water, aqueous solutions, emulsions. With proven, powerful condenser motor, quiet running, 860 W, on/off switch.

Rems Curvo 50 Bending Tool 32-50MM

Rems Curvo 50 Bending Tool 32-50MM

Universal, compact electric tool for cold bending of pipes and tubes up to 90 degrees. Can be used anywhere, without vice.

Freeze Master 110v 15 - 42mm

Freeze Master 110v 15 - 42mm

Suitable for domestic and light industrial use the 420D has freeze heads to fit pipes from 15mm to 42mm.

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

Ridgid 975 Combo Insitu Roll Groover 1 1/4 Inch to 6 Inch

Ridgid 975 Combo Insitu Roll Groover 1 1/4 Inch to 6 Inch

The Model 975 Combo roll Groover is two tools in one. Like other RIDGID roll Groovers, the 975 mounts on the RIDGID 300 Power Drive for machine-powered roll grooving jobs, but is also designed to manually roll groove in-place pipe.

Ridgid 918 Hydraulic Groover Supplied 8 Inch to 12 Inch

Ridgid 918 Hydraulic Groover Supplied 8 Inch to 12 Inch

The RIDGID Model 918 Hydraulic Roll Groover features a powerful 15-ton hydraulic ram in a compact, easy to transport unit. With one man set-up and operation, the 918 is the ideal groover for job site requirements.

Ridgid 916 Portable Roll Groover 1 1/4 Inch to 6 Inch

Ridgid 916 Portable Roll Groover 1 1/4 Inch to 6 Inch

The RIDGID Model 916 Roll Groover is the most durable and efficient lightweight portable unit available. Built with a solid, durable cast-iron housing, it withstands heavy usage, yet is light enough for easy transportation.

Ridgid 918 Roll Groover, Power Drive & Pipe Support

Ridgid 918 Roll Groover, Power Drive & Pipe Support

The RIDGID Model 918 Hydraulic Roll Groover features a powerful 15-ton hydraulic ram in a compact, easy to transport unit. With one man set-up and operation, the 918 is the ideal groover for job site requirements.

Back to Ridgid Roll Grooving Equipment

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools