Pipe Threading Machines

Ridgid 965/RJ98 Pipe Support/Pipe Roller 4 Inch to 12 Inch

Ridgid 965/RJ98 Pipe Support/Pipe Roller 4 Inch to 12 Inch

Ridgid 965 / Rj98 Pipe Support

Ridgid

Ridgid 965/RJ98 Pipe Support/Pipe Roller 4 Inch to 12 Inch

Ideal for use with threading machines, roll grooving, or other pipe working applications.

Operators Manual

Operators Manual

Recommended PPE

Ideal for use with threading machines, roll grooving, or other pipe working applications.

Additional Information

Features:

Adjustable pipe support
Ideal for use with threading machines, roll grooving, or other pipe working applications

,

Related Products

Hire

Ridgid Additional Die Head

Ridgid Additional Die Head

Additional Die Head.

Hire

8 Inch Axxair Cutter C/W Bench

8 Inch Axxair Cutter C/W Bench

The Axxair cutter offers cutting without tube deformation and is ideal for thin wall stainless tubes and pipes. It provides a cut of quality geometry leaving a good surface condition.

Hire

Electric Water Test Pump Max. 1500PSI / 100BAR

Electric Water Test Pump Max. 1500PSI / 100BAR

The Hilta Electric Water Test Pump has a maximum Flow of 3.4 Litres/Min and a maximum pressure 1500psi / 100bar.

Hire

REMS Tiger SR Electric Reciprocating Pipe Saw

REMS Tiger SR Electric Reciprocating Pipe Saw

REMS Tiger SR - Saws effortless, fast, right angle. Electronic stroke speed. Robust and handy.

8 CFM Compressor 130 PS1 C/W Hose and 1/2 Inch BSP Bush

8 CFM Compressor 130 PS1 C/W Hose and 1/2 Inch BSP Bush

This 8 CFM Compressor is a sturdy mid range air compressor packed with impressive features and capable of delivering a full 10 Bar working pressure.

Gf Cut & Bevel Machine RA6 2 Inch to 6 Inch C/W Bench

Gf Cut & Bevel Machine RA6 2 Inch to 6 Inch C/W Bench

The GF Cut and Bevel Machine offers many advantages including multiple point clamping, fast adjustment of dimensions and regulated cutting speed.

Ridgid 258 Hydraulic/Powered Pipe Cutter 2 1/2 Inch to 8 Inch

Ridgid 258 Hydraulic/Powered Pipe Cutter 2 1/2 Inch to 8 Inch

The RIDGID Model 258 Power Pipe Cutter cuts 2 1/2 Inch (65 mm) to 8 Inch (200 mm) schedule 10*/40 steel pipe, galvanized pipe, rigid conduit, etc. Powered by the RIDGID No. 700 Power Drive (110v) or Ridgid 760 FXP Power Drive (60v cordless) , the 258 is a displacement cutter that provides square cuts.

RX Roller Set Stainless Steel SCH 10 and Below

RX Roller Set Stainless Steel SCH 10 and Below

RX Roller Set to suit stainless steel SCH 10 and below.

Machine Guards

Machine Guards keep pedestrians away from moving pipe on threading equipment.

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP c/w Pipe Support

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP c/w Pipe Support

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP C/W Die Heads and Pipe Support.

Ridgid 161 Receeder 4 Inch to 6 Inch

Ridgid 161 Receeder 4 Inch to 6 Inch

Increases capacity of 2 Inch or 3 Inch threader to 4 Inch.

Nipple Chuck

Holds short or close nipples for threading.

Back to Pipe Threading Machines

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools