Pipe Threading Machines

Ridgid 965/RJ98 Pipe Support/Pipe Roller 4 Inch to 12 Inch

Ridgid 965/RJ98 Pipe Support/Pipe Roller 4 Inch to 12 Inch

Ridgid 965 / Rj98 Pipe Support

Ridgid

Ridgid 965/RJ98 Pipe Support/Pipe Roller 4 Inch to 12 Inch

Ideal for use with threading machines, roll grooving, or other pipe working applications.

Operators Manual

Operators Manual

Recommended PPE

Ideal for use with threading machines, roll grooving, or other pipe working applications.

Additional Information

Features:

Adjustable pipe support
Ideal for use with threading machines, roll grooving, or other pipe working applications

,

Related Products

Hire

4 Inch Axxair Cutter C/W Bench

4 Inch Axxair Cutter C/W Bench

The Axxair cutter offers cutting without tube deformation and is ideal for thin wall stainless tubes and pipes. It provides a cut of quality geometry leaving a good surface condition.

Hire

REMS Eskimo CO2 Kit 10 - 60mm

REMS Eskimo CO2 Kit 10 - 60mm

Easy, fast freezing of pipes which are not drained, with CFC-free refrigerant carbon dioxide. For repair, extensions of piping systems.

Hire

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

A versatile and lightweight machine that can extend its threading ability up to 6 Inch by using either a 141 or 161 geared threader.

Hire

Rems Curvo 15 - 28mm 110v Bender

Rems Curvo 15 - 28mm 110v Bender

Universal, compact electric tool for cold bending of pipes and tubes up to 180 degrees. Can be used anywhere, without vice.

Ridgid 161 Receeder 4 Inch to 6 Inch

Ridgid 161 Receeder 4 Inch to 6 Inch

Increases capacity of 2 Inch or 3 Inch threader to 4 Inch.

7.5 CFM Compressor 115 PS1 C/W Hose and 1/2 Inch BSP Bush

7.5 CFM Compressor 115 PS1 C/W Hose and 1/2 Inch BSP Bush

High output with compact dimensions makes this tough piston compressor especially handy for on-site tasks involving fixing, spraying, inflating and dust / debris blowing.

Ridgid 918 Roll Groover, Power Drive & Pipe Support

Ridgid 918 Roll Groover, Power Drive & Pipe Support

The RIDGID Model 918 Hydraulic Roll Groover features a powerful 15-ton hydraulic ram in a compact, easy to transport unit. With one man set-up and operation, the 918 is the ideal groover for job site requirements.

Electric Water Test Pump Max. 1500PSI / 100BAR

Electric Water Test Pump Max. 1500PSI / 100BAR

The Hilta Electric Water Test Pump has a maximum Flow of 3.4 Litres/Min and a maximum pressure 1500psi / 100bar.

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support.

Ridgid 161 Receeder 4 Inch to 6 Inch

Ridgid 161 Receeder 4 Inch to 6 Inch

Increases capacity of 2 Inch or 3 Inch threader to 4 Inch.

Drip Tray

For use under machines to protect floors etc.

Rex Threading Machine 1/2 Inch to 4 Inch BSP c/w Pipe Support

Rex Threading Machine 1/2 Inch to 4 Inch BSP c/w Pipe Support

Rex Threading Machine N100A.

Back to Pipe Threading Machines

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools