Victaulic Roll Grooving Equipment

RX Roller Set Carbon SCH 10 and Below

RX Roller Set Carbon SCH 10 and Below

RX Roller Set

RX Roller Set Carbon SCH 10 and Below

RX Roller Set Carbon SCH 10 and Below.

Operators Manual

Operators Manual

Recommended PPE

RX Roller Set Carbon SCH 10 and Below.

Additional Information

Features:

For use with models VE272

,

Related Products

Hire

Drain Bungs 1 Inch to 6 Inch

Drain Bungs 1 Inch to 6 Inch

Drain Bungs isolate and seal sections of drain during testing or repair.

Hire

7.5 CFM Compressor 115 PS1 C/W Hose and 1/2 Inch BSP Bush

7.5 CFM Compressor 115 PS1 C/W Hose and 1/2 Inch BSP Bush

High output with compact dimensions makes this tough piston compressor especially handy for on-site tasks involving fixing, spraying, inflating and dust / debris blowing.

Hire

Ridgid 141 Receeder 2 1/2 Inch to 4 Inch

Ridgid 141 Receeder 2 1/2 Inch to 4 Inch

Upgrades Ridgid 300 to 2 1/2 Inch - 4 Inch.

Hire

Drip Tray

For use under machines to protect floors etc.

Ridgid Stud Cutter 10MM

Ridgid Stud Cutter 10MM

The 1390 Threaded Rod Cutter is designed to cut threaded rods used to hang pipes for air conditioning, sprinkler installations and other lightweight frames from the ceiling. Makes clean cuts without damaging thread.

Ridgid HC450 Hole Cutter for Mechanical Tees

Ridgid HC450 Hole Cutter for Mechanical Tees

The HC450 is ideal for mechanical, industrial maintenance and fire protection contractors since it cuts holes into a wide variety of pipe materials.

Rems Amigo 1/2 Inch to 2 Inch 110v

Rems Amigo 1/2 Inch to 2 Inch 110v

Powerful, easy-to-operate electric tool for threading with unique, patented support bracket. Ready for use anywhere, without vice. Ideal for repair, renovation, job site.

Rems Curvo 50 Bending Tool 32-50MM

Rems Curvo 50 Bending Tool 32-50MM

Universal, compact electric tool for cold bending of pipes and tubes up to 90 degrees. Can be used anywhere, without vice.

Copper Roller Set for British Standard Copper

Copper Roller Set for British Standard Copper

Copper Roller Set for British Standard Copper.

AGS Roller Set 14 Inch to 16 Inch for use on VE416 FSD

AGS Roller Set 14 Inch to 16 Inch for use on VE416 FSD

AGS Roller Set 14 Inch to 16 Inch for use on VE416 FSD.

RX Roller Set Stainless Steel SCH 10 and Below

RX Roller Set Stainless Steel SCH 10 and Below

RX Roller Set to suit stainless steel SCH 10 and below.

Victaulic VE416 FSD 14 Inch to 16 Inch AGS Pipe

Victaulic VE416 FSD 14 Inch to 16 Inch AGS Pipe

The Victaulic VE416 Roll Grooving Tool Equipped with a pipe stabilizer for 6 Inch -16 Inch pipe sizes to control pipe sway. Groove depth adjuster provides precise groove dimensions and allows for easy adjustment for initial groove diameter.

Back to Victaulic Roll Grooving Equipment

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools