Victaulic Roll Grooving Equipment

RX Roller Set Carbon SCH 10 and Below

RX Roller Set Carbon SCH 10 and Below

RX Roller Set

RX Roller Set Carbon SCH 10 and Below

RX Roller Set Carbon SCH 10 and Below.

Operators Manual

Operators Manual

Recommended PPE

RX Roller Set Carbon SCH 10 and Below.

Additional Information

Features:

For use with models VE272

,

Related Products

Hire

Tubela Rotary Scissor Bender 15-54mm Carbon Steel/Copper

Tubela Rotary Scissor Bender 15-54mm Carbon Steel/Copper

The Tubela H3PR is a hand operated 2" nb (60.3mmOD) capacity ram-press pipe bender for Gas or Black pipe, but also for bending thicker wall hydraulic steel and stainless steel tubes that are being increasingly used in industry where higher pressures and temperatures are required. Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.

Hire

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

A versatile and lightweight machine that can extend its threading ability up to 6 Inch by using either a 141 or 161 geared threader.

Hire

Ridgid 258XL Hydraulic/Powered Pipe Cutter 8 Inch to 12 Inch

Ridgid 258XL Hydraulic/Powered Pipe Cutter 8 Inch to 12 Inch

The RIDGID 258XL offers 8 Inch (200 mm) to 12 Inch (300 mm) diameter pipe cutting capacity. Powered by the RIDGID No. 700 Power Drive (110v) or Ridgid 760 FXP Power Drive (60v cordless) , the 258XL is a displacement cutter that provides square cuts.

Hire

Drain Bungs 1 Inch to 6 Inch

Drain Bungs 1 Inch to 6 Inch

Drain Bungs isolate and seal sections of drain during testing or repair.

Ridgid 916 Portable Roll Groover 2 Inch to 6 Inch Copper

Ridgid 916 Portable Roll Groover 2 Inch to 6 Inch Copper

The RIDGID Model 916 Roll Groover is the most durable and efficient lightweight portable unit available. Built with a solid, durable cast-iron housing, it withstands heavy usage, yet is light enough for easy transportation.

Rems Solar Push K60

Rems Solar Push K60

Self-suction centrifugal pump, suitable for different transport media, e.g. heat transfer liquids, antifreeze, water, aqueous solutions, emulsions. With proven, powerful condenser motor, quiet running, 860 W, on/off switch.

12 Inch Axxair Cutter C/W Bench

12 Inch Axxair Cutter C/W Bench

The Axxair cutter offers cutting without tube deformation and is ideal for thin wall stainless tubes and pipes. It provides a cut of quality geometry leaving a good surface condition.

Ridgid 258XL Hydraulic/Powered Pipe Cutter 8 Inch to 12 Inch

Ridgid 258XL Hydraulic/Powered Pipe Cutter 8 Inch to 12 Inch

The RIDGID 258XL offers 8 Inch (200 mm) to 12 Inch (300 mm) diameter pipe cutting capacity. Powered by the RIDGID No. 700 Power Drive (110v) or Ridgid 760 FXP Power Drive (60v cordless) , the 258XL is a displacement cutter that provides square cuts.

Victaulic 272SFS Roll Grooving Machine 2 Inch to 8 Inch

Victaulic 272SFS Roll Grooving Machine 2 Inch to 8 Inch

Portable roll groover mounts easily to a Victaulic VPD752 or Rigid 300 power drive. Hand pump operation with a unique pivot arm design reduces handle effort. Tracking rolls reduce pipe walk-off. VE272SFS permitted for roll grooving thin wall carbon steel pipe 2 Inch to 12 Inch.

Victaulic 272SFS Roll Grooving Machine 2 Inch to 8 Inch C/W 300C Power Drive and Tristand

Victaulic 272SFS Roll Grooving Machine 2 Inch to 8 Inch C/W 300C Power Drive and Tristand

Portable roll groover mounts easily to a Victaulic VPD752 or Rigid 300 power drive. Hand pump operation with a unique pivot arm design reduces handle effort. Tracking rolls reduce pipe walk-off. VE272SFS permitted for roll grooving thin wall carbon steel pipe 2 Inch to 12 Inch.

Victaulic VE416 FSD 2 Inch to 12 Inch OGS Pipe

Victaulic VE416 FSD 2 Inch to 12 Inch OGS Pipe

The Victaulic VE416 Roll Grooving Tool Equipped with a pipe stabilizer for 6 Inch -16 Inch pipe sizes to control pipe sway. Groove depth adjuster provides precise groove dimensions and allows for easy adjustment for initial groove diameter.

AGS Roller Set 14 Inch to 16 Inch for use on VE416 FSD

AGS Roller Set 14 Inch to 16 Inch for use on VE416 FSD

AGS Roller Set 14 Inch to 16 Inch for use on VE416 FSD.

Back to Victaulic Roll Grooving Equipment

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools