Tubela Rotary Scissor Bender for bending 15 to 54mm carbon steel.
Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.
The Tubela H3PR is a hand operated 2" nb (60.3mmOD) capacity ram-press pipe bender for Gas or Black pipe, but also for bending thicker wall hydraulic steel and stainless steel tubes that are being increasingly used in industry where higher pressures and temperatures are required.
Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.
Victaulic 272SFS Roll Grooving Machine 2 Inch to 8 Inch
Portable roll groover mounts easily to a Victaulic VPD752 or Rigid 300 power drive. Hand pump operation with a unique pivot arm design reduces handle effort. Tracking rolls reduce pipe walk-off. VE272SFS permitted for roll grooving thin wall carbon steel pipe 2 Inch to 12 Inch.
Victaulic 272SFS Roll Grooving Machine 2 Inch to 8 Inch C/W 300C Power Drive and Tristand
Portable roll groover mounts easily to a Victaulic VPD752 or Rigid 300 power drive. Hand pump operation with a unique pivot arm design reduces handle effort. Tracking rolls reduce pipe walk-off. VE272SFS permitted for roll grooving thin wall carbon steel pipe 2 Inch to 12 Inch.
Victaulic RG3600 Pipe Roll Grooving Tool StrengThin 100
The Victaulic RG3600 Pipe Roll Grooving Tool is a Portable lightweight field groover designed to groove 2" - 12" light wall stainless steel for StrengThin 100.
The Victaulic VE416 Roll Grooving Tool Equipped with a pipe stabilizer for 6 Inch -16 Inch pipe sizes to control pipe sway. Groove depth adjuster provides precise groove dimensions and allows for easy adjustment for initial groove diameter.
The Victaulic VE416 Roll Grooving Tool Equipped with a pipe stabilizer for 6 Inch -16 Inch pipe sizes to control pipe sway. Groove depth adjuster provides precise groove dimensions and allows for easy adjustment for initial groove diameter.
These Clamps are available in 5 sizes (38,51,76,102,152mm)
They should be fitted over the hubs of the Enfusion sockets
And tightened before electrofusion welding.
This Vulcathene fusion machine is the ideal unit for fast and efficient connection of Vulcathene pipework from 40mm to 152mm in diameter.
Utilising the extreme heat and pressure produced during welding, this unit makes simple, reliable joints between pipes.
The deckRailXtra® system is designed to safely restrain and hold materials in place, allowing freedom of movement for the Operator without any intrusion into the platform deck area. The deckRailXtra® system has been manufactured using state of the art engineering principles and an innovative, harmonised design approach, both ergonomic and intuitive to use, the whole system perfectly complementing the MEWP it is attached to.
