Pipe Threading Machines

Drip Tray

Drip Tray

Drip Tray

For use under machines to protect floors etc.

Operators Manual

Operators Manual

Recommended PPE

For use under machines to protect floors etc.

Additional Information

Features:

Collects oil and drips
For use under machines to protect floors etc

,

Related Products

Hire

Victaulic VE416 FSD 2 Inch to 12 Inch OGS Pipe

Victaulic VE416 FSD 2 Inch to 12 Inch OGS Pipe

The Victaulic VE416 Roll Grooving Tool Equipped with a pipe stabilizer for 6 Inch -16 Inch pipe sizes to control pipe sway. Groove depth adjuster provides precise groove dimensions and allows for easy adjustment for initial groove diameter.

Hire

Ridgid 228 Pipe Assembly Tool 2 Inch - 8 Inch

Ridgid 228 Pipe Assembly Tool 2 Inch - 8 Inch

The RIDGID 228 Pipe Assembly Tool is designed to help assemble (sleeved) soil pipes. It is especially useful when operating in tight quarters.

Hire

10 litre Carbon Dioxide Liquid Cylinder

10 litre Carbon Dioxide Liquid Cylinder

10 litre cylinder for carbon dioxide liquid. All our cylinders are hired out at a weekly rate. The contents of the cylinders are charged as a sales item.Please call our hire desk for associated costs.

Hire

Scorp Cutter 1 Inch to 8 Inch 110v Square Cut

Scorp Cutter 1 Inch to 8 Inch 110v Square Cut

The ultimate and fast solution for cutting of cast iron, stainless steel, steel, copper, aluminum and plastic pipes.

Hilmor 16 - 25mm Conduit Bender

Hilmor 16 - 25mm Conduit Bender

Conduit installation times are decimated and waste is significantly reduced.

Victaulic 272SFS Roll Grooving Machine 2 Inch to 8 Inch C/W 300C Power Drive and Tristand

Victaulic 272SFS Roll Grooving Machine 2 Inch to 8 Inch C/W 300C Power Drive and Tristand

Portable roll groover mounts easily to a Victaulic VPD752 or Rigid 300 power drive. Hand pump operation with a unique pivot arm design reduces handle effort. Tracking rolls reduce pipe walk-off. VE272SFS permitted for roll grooving thin wall carbon steel pipe 2 Inch to 12 Inch.

8 Inch Axxair Cutter C/W Bench

8 Inch Axxair Cutter C/W Bench

The Axxair cutter offers cutting without tube deformation and is ideal for thin wall stainless tubes and pipes. It provides a cut of quality geometry leaving a good surface condition.

6 Inch Axxair Cutter C/W Bench

6 Inch Axxair Cutter C/W Bench

The Axxair cutter offers cutting without tube deformation and is ideal for thin wall stainless tubes and pipes. It provides a cut of quality geometry leaving a good surface condition.

Nipple Chuck

Holds short or close nipples for threading.

Ridgid 965/RJ98 Pipe Support/Pipe Roller 4 Inch to 12 Inch

Ideal for use with threading machines, roll grooving, or other pipe working applications.

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

A versatile and lightweight machine that can extend its threading ability up to 6 Inch by using either a 141 or 161 geared threader.

Ridgid 161 Receeder 4 Inch to 6 Inch

Ridgid 161 Receeder 4 Inch to 6 Inch

Increases capacity of 2 Inch or 3 Inch threader to 4 Inch.

Back to Pipe Threading Machines

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools