Pipe Threading Machines

Drip Tray

Drip Tray

Drip Tray

For use under machines to protect floors etc.

Operators Manual

Operators Manual

Recommended PPE

For use under machines to protect floors etc.

Additional Information

Features:

Collects oil and drips
For use under machines to protect floors etc

,

Related Products

Hire

Ridgid 4S Pipe Roller Cutter 2 1/2 Inch to 4 Inch

Ridgid 4S Pipe Roller Cutter 2 1/2 Inch to 4 Inch

For fast clean pipe cutting.

Hire

Ridgid 246 Snap Cutter up to 6 Inch

Ridgid 246 Snap Cutter up to 6 Inch

The Ridgid 246 Snap Cutter is quick and convenient to use and requires minimal clearance around the pipe.

Hire

Ridgid 915 Insitu Portable Roll Groover Rollers 1 1/4in to 1 1/2in

Ridgid 915 Insitu Portable Roll Groover Rollers 1 1/4in to 1 1/2in

The RIDGID 915 Roll Groover is a manual roll groover for in-place field applications.

Hire

Ridgid Stud Cutter 10MM

Ridgid Stud Cutter 10MM

The 1390 Threaded Rod Cutter is designed to cut threaded rods used to hang pipes for air conditioning, sprinkler installations and other lightweight frames from the ceiling. Makes clean cuts without damaging thread.

Fein Reciprocating Pipe Saw 100mm to 325mm C/W Clamp

Fein Reciprocating Pipe Saw 100mm to 325mm C/W Clamp

Hacksaw for pipes and profiled sections.

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

8 Inch Pulling Tool

8 Inch Pulling Tool

With the pulling tool no blocks, chains or machinery are needed and all operations can be carried out by one man. Simply place the tool on the pipes and pull them together.

Rems Curvo 15 - 28mm 110v Bender

Rems Curvo 15 - 28mm 110v Bender

Universal, compact electric tool for cold bending of pipes and tubes up to 180 degrees. Can be used anywhere, without vice.

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support.

Ridgid 141 Receeder 2 1/2 Inch to 4 Inch

Ridgid 141 Receeder 2 1/2 Inch to 4 Inch

Upgrades Ridgid 300 to 2 1/2 Inch - 4 Inch.

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

A versatile and lightweight machine that can extend its threading ability up to 6 Inch by using either a 141 or 161 geared threader.

Rex Threading Machine 1/2 Inch to 4 Inch NPT c/w Pipe Support

Rex Threading Machine 1/2 Inch to 4 Inch NPT c/w Pipe Support

Rex Threading Machine N100A.

Back to Pipe Threading Machines

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools