Pipe Threading Machines

Drip Tray

Drip Tray

Drip Tray

For use under machines to protect floors etc.

Operators Manual

Operators Manual

Recommended PPE

For use under machines to protect floors etc.

Additional Information

Features:

Collects oil and drips
For use under machines to protect floors etc

,

Related Products

Hire

Electric Water Test Pump Max. 1500PSI / 100BAR

Electric Water Test Pump Max. 1500PSI / 100BAR

The Hilta Electric Water Test Pump has a maximum Flow of 3.4 Litres/Min and a maximum pressure 1500psi / 100bar.

Hire

Ridgid Welding Clamp

Ridgid Welding Clamp

Made of durable performance-proven material and designed to resist strain, heat and warpage during tacking.

Hire

Ridgid 916 Portable Roll Groover 1 1/4 Inch to 6 Inch

Ridgid 916 Portable Roll Groover 1 1/4 Inch to 6 Inch

The RIDGID Model 916 Roll Groover is the most durable and efficient lightweight portable unit available. Built with a solid, durable cast-iron housing, it withstands heavy usage, yet is light enough for easy transportation.

Hire

Ridgid Stud Cutter 8MM

Ridgid Stud Cutter 8MM

The 1390 Threaded Rod Cutter is designed to cut threaded rods used to hang pipes for air conditioning, sprinkler installations and other lightweight frames from the ceiling. Makes clean cuts without damaging thread.

Rubber Drain Test Bags 2 Inch to 6 Inch

Rubber Drain Test Bags 2 Inch to 6 Inch

Ideal for air testing pipe systems.

Ridgid 590L 14 Inch Dry Cut Saw

Ridgid 590L 14 Inch Dry Cut Saw

Ridgid 590L Dry Cut saw produces clean, virtually burr-free cuts on steel, copper, aluminium and plastics and an adjustable cutting angle 45 degrees - 90 degrees. Cuts Steel Tube up to 130mm and 115mm Box Section

Ridgid 918 Stabilizer Kit

Ridgid 918 Stabilizer Kit

Stabilizer kit to be used in conjunction with the Ridgid 918 Groover.

Ridgid 472 (868) Hinged 4 Wheel Cutters 8 Inch to 12 Inch

Ridgid 472 (868) Hinged 4 Wheel Cutters 8 Inch to 12 Inch

Designed for rapid cutting of steel pipe and heavy-wall steel pipe.

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support.

Nipple Chuck

Holds short or close nipples for threading.

Ridgid 161 Receeder 4 Inch to 6 Inch

Ridgid 161 Receeder 4 Inch to 6 Inch

Increases capacity of 2 Inch or 3 Inch threader to 4 Inch.

Rex Threading Machine 1/2 Inch to 4 Inch BSP c/w Pipe Support

Rex Threading Machine 1/2 Inch to 4 Inch BSP c/w Pipe Support

Rex Threading Machine N100A.

Back to Pipe Threading Machines

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools