0 items
Electric Water Test Pump Max. 1500PSI / 100BAR
Electric Water Test Pump Max. 1500PSI / 100BAR
The Hilta Electric Water Test Pump has a maximum Flow of 3.4 Litres/Min and a maximum pressure 1500psi / 100bar.
The Hilta Electric Water Test Pump has a maximum Flow of 3.4 Litres/Min and a maximum pressure 1500psi / 100bar.
Additional Information
Features:
- 110 volt electric motor
- 82dB(A) @ 7m
- 1500psi / 100bar
Specification:
- FuelElectric
- Fuel1500
- Engine Type110Volt Electric Motor
- Average Sound Pressure Leve82dB(A) @ 7m
- Maximum Pressure1500psi / 100bar
- Maximum Flow3.4 Litres/Min
These are the recommended PPE required for this product.

Eye Protection

Hand Protection

Foot Protection
Related Products
Hire

Ridgid 1450 Hand Pressure Test Pump Max. 725PSI / 50BAR
The 1450 Pressure Test Pump tests hydraulically for leaks in installations which are required to be leak proof and will test systems up to 725 PSI. Especially for use in heating, compressed air, refrigeration systems, oil installations, sprinkler systems and other small bore pipe installations.
Hire

Petrol Water Test Pump Max. 1500PSI / 100BAR
228-petrol-water-test-pump-max-100-bar
This Hilta Petrol Water Test Pump is has a fuel Tank capacity 3.6 Ltrs and can reach a maximum pressure of 1500psi / 100bar.
Hire

Rems Solar Push K60
Self-suction centrifugal pump, suitable for different transport media, e.g. heat transfer liquids, antifreeze, water, aqueous solutions, emulsions. With proven, powerful condenser motor, quiet running, 860 W, on/off switch.
Hire

Ridgid Stud Cutter 8MM
The 1390 Threaded Rod Cutter is designed to cut threaded rods used to hang pipes for air conditioning, sprinkler installations and other lightweight frames from the ceiling. Makes clean cuts without damaging thread.
Hire

4 Inch Pulling Tool
With the pulling tool no blocks, chains or machinery are needed and all operations can be carried out by one man. Simply place the tool on the pipes and pull them together.
Hire

Ridgid 468 Hinged 4 Wheel Cutters 6 Inch to 8 Inch
Designed for rapid cutting of steel pipe and heavy-wall steel pipe.
Hire

Ridgid 258 Hydraulic/Powered Pipe Cutter 2 1/2 Inch to 8 Inch
The RIDGID Model 258 Power Pipe Cutter cuts 2 1/2 Inch (65 mm) to 8 Inch (200 mm) schedule 10*/40 steel pipe, galvanized pipe, rigid conduit, etc. Powered by the RIDGID No. 700 Power Drive (110v) or Ridgid 760 FXP Power Drive (60v cordless) , the 258 is a displacement cutter that provides square cuts.