Grinding & Cutting

Fein Reciprocating Pipe Saw 100mm to 325mm C/W Clamp

Fein Reciprocating Pipe Saw 100mm to 325mm C/W Clamp

Fein Recipricating Saw

Fein Reciprocating Pipe Saw 100mm to 325mm C/W Clamp

Hacksaw for pipes and profiled sections.

Operators Manual

Operators Manual

Recommended PPE

Hacksaw for pipes and profiled sections.

More Information

Features:

Ideally suited for trimming pipes and shaped section made of steel, cast-iron, autoclaved aerated concrete and plastics.
Especially suitable for sandwich material and layers of different materials.
Adjustable clamping devices permit mitre cuts up to 45° as well.
available in110V
Clamp and feed device available for profiles and pipes from Ø 80 mm to Ø 440 mm

Specifications:

Input	W	750
Output	W	480
Strokes	rpm	100 – 350
Stroke of Blade	mm	60
Cable with Plug	M	2.5
Weight Acoording to EPTA	Kg	6.4
Max Cutting Capacity
Pipes Up ToØ	mm	440*
Profiles up to W x H	mm	290 x 550
* with Chain Extension

,

Related Products

Hire

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

Hire

Ridgid 466 Hinged 4 Wheel Cutter 4 Inch to 6 Inch

Ridgid 466 Hinged 4 Wheel Cutter 4 Inch to 6 Inch

Designed for rapid cutting of steel pipe and heavy-wall steel pipe.

Hire

Ridgid 460 Tripod Vice 6 Inch Capacity

Ridgid 460 Tripod Vice 6 Inch Capacity

Ridgid Tripod Vices feature integral folding legs for easy transport and setup, tool hangers and a base which overhangs the front legs for clear tool swing.

Hire

Ridgid 918 Stabilizer Kit

Ridgid 918 Stabilizer Kit

Stabilizer kit to be used in conjunction with the Ridgid 918 Groover.

Ridgid 918 Hydraulic Groover Supplied 2 Inch to 6 Inch

Ridgid 918 Hydraulic Groover Supplied 2 Inch to 6 Inch

The RIDGID Model 918 Hydraulic Roll Groover features a powerful 15-ton hydraulic ram in a compact, easy to transport unit. With one man set-up and operation, the 918 is the ideal groover for job site requirements.

Ridgid 156 6 Inch Copper Cutters

Ridgid 156 6 Inch Copper Cutters

Quick-Acting Tubing Cutters.

8 CFM Compressor 130 PS1 C/W Hose and 1/2 Inch BSP Bush

8 CFM Compressor 130 PS1 C/W Hose and 1/2 Inch BSP Bush

This 8 CFM Compressor is a sturdy mid range air compressor packed with impressive features and capable of delivering a full 10 Bar working pressure.

RX Roller Set Carbon SCH 10 and Below

RX Roller Set Carbon SCH 10 and Below

RX Roller Set Carbon SCH 10 and Below.

18v Cordless Jigsaw

18v Cordless Jigsaw

This Makita 18v Cordless Jigsaw offers smooth and powerful cutting at the high stroke speed of 2,600spm.

14 Inch 2414 Chop Saw

14 Inch 2414 Chop Saw

The Makita 2414 Chop Saw offers a quick release vice and a large sized spark guard to prevent backward scattering of spark.

7 Inch Angle Grinder

7 Inch Angle Grinder

This Makita 7 Inch guide offers a large rubber tool rest protects work piece from scratches.

STRUTSLAYR Strut Shear Head KIT, HEAD+CASE+ 41 mm x 21 mm DIE

STRUTSLAYR Strut Shear Head KIT, HEAD+CASE+ 41 mm x 21 mm DIE

The RIDGID© STRUTSLAYR™ delivers quality, burr-free strut channel cuts on the jobsite in 5 seconds or less. Supplied with RIDGID 32kN press tool*, the STRUTSLAYR strut cutter offers a clean, consistent cut with a simple pull of a trigger: no grinding or sawing sparks!

Back to Grinding & Cutting

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools