Electric Water Test Pump Max. 1500PSI / 100BAR
Electric Water Test Pump Max. 1500PSI / 100BAR
The Hilta Electric Water Test Pump has a maximum Flow of 3.4 Litres/Min and a maximum pressure 1500psi / 100bar.
The Hilta Electric Water Test Pump has a maximum Flow of 3.4 Litres/Min and a maximum pressure 1500psi / 100bar.
Additional Information
Features:
- 110 volt electric motor
- 82dB(A) @ 7m
- 1500psi / 100bar
Specification:
- FuelElectric
- Fuel1500
- Engine Type110Volt Electric Motor
- Average Sound Pressure Leve82dB(A) @ 7m
- Maximum Pressure1500psi / 100bar
- Maximum Flow3.4 Litres/Min
These are the recommended PPE required for this product.



Related Products

7.5 CFM Compressor 115 PS1 C/W Hose and 1/2 Inch BSP Bush
High output with compact dimensions makes this tough piston compressor especially handy for on-site tasks involving fixing, spraying, inflating and dust / debris blowing.

Rems Solar Push K60
Self-suction centrifugal pump, suitable for different transport media, e.g. heat transfer liquids, antifreeze, water, aqueous solutions, emulsions. With proven, powerful condenser motor, quiet running, 860 W, on/off switch.

REMS Multipush SLW Flushing Air and Water Test Pump
Powerful, compact, electronic flushing and pressure testing unit with oil-free compressor.

Ridgid 258 Hydraulic/Powered Pipe Cutter 2 1/2 Inch to 8 Inch
The RIDGID Model 258 Power Pipe Cutter cuts 2 1/2 Inch (65 mm) to 8 Inch (200 mm) schedule 10*/40 steel pipe, galvanized pipe, rigid conduit, etc. Powered by the RIDGID No. 700 Power Drive (110v) or Ridgid 760 FXP Power Drive (60v cordless) , the 258 is a displacement cutter that provides square cuts.

RX Roller Set Stainless Steel SCH 10 and Below
RX Roller Set to suit stainless steel SCH 10 and below.

Ridgid 590L 14 Inch Dry Cut Saw
Ridgid 590L Dry Cut saw produces clean, virtually burr-free cuts on steel, copper, aluminium and plastics and an adjustable cutting angle 45 degrees – 90 degrees. Cuts Steel Tube up to 130mm and 115mm Box Section





