Manual T Drill for Copper 15 - 42mm

Manual T Drill for Copper 15 - 42mm

Manual Tee- Extractor For Copper

Manual T Drill for Copper 15 - 42mm

Tee Extractor.

Operators Manual

Operators Manual

Recommended PPE

Tee Extractor.

Additional Information

Rothenberger Tee-Extractor Set

Capacity: 15-42mm

Type Of Set: Manual

Standard Equipment:
1 X Tee-Extractor Set, Inc: 1 X Unidrill,
1x Ratchet, 1 X Cam Pincer,
1 X Extractors, 15-42mm.

,

Related Products

Hire

T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a portable tee forming machine for copper tubes. It is an ideal solution for making tee joints in main run tube.

Hire

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a portable tee forming machine for copper tubes. It is an ideal solution for making tee joints in main run tube.

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

Ridgid 468 Hinged 4 Wheel Cutters 6 Inch to 8 Inch

Ridgid 468 Hinged 4 Wheel Cutters 6 Inch to 8 Inch

Designed for rapid cutting of steel pipe and heavy-wall steel pipe.

8 Inch Pulling Tool

8 Inch Pulling Tool

With the pulling tool no blocks, chains or machinery are needed and all operations can be carried out by one man. Simply place the tool on the pipes and pull them together.

Rems Solar Push K60

Rems Solar Push K60

Self-suction centrifugal pump, suitable for different transport media, e.g. heat transfer liquids, antifreeze, water, aqueous solutions, emulsions. With proven, powerful condenser motor, quiet running, 860 W, on/off switch.

Victaulic 272SFS Roll Grooving Machine 2 Inch to 8 Inch C/W 300C Power Drive and Tristand

Victaulic 272SFS Roll Grooving Machine 2 Inch to 8 Inch C/W 300C Power Drive and Tristand

Portable roll groover mounts easily to a Victaulic VPD752 or Rigid 300 power drive. Hand pump operation with a unique pivot arm design reduces handle effort. Tracking rolls reduce pipe walk-off. VE272SFS permitted for roll grooving thin wall carbon steel pipe 2 Inch to 12 Inch.

Back to Pipe Fitting

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools