Manual T Drill for Copper 15 - 42mm

Manual T Drill for Copper 15 - 42mm

Manual Tee- Extractor For Copper

Manual T Drill for Copper 15 - 42mm

Tee Extractor.

Operators Manual

Operators Manual

Recommended PPE

Tee Extractor.

Additional Information

Rothenberger Tee-Extractor Set

Capacity: 15-42mm

Type Of Set: Manual

Standard Equipment:
1 X Tee-Extractor Set, Inc: 1 X Unidrill,
1x Ratchet, 1 X Cam Pincer,
1 X Extractors, 15-42mm.

,

Related Products

Hire

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

Hire

T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a portable tee forming machine for copper tubes. It is an ideal solution for making tee joints in main run tube.

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a portable tee forming machine for copper tubes. It is an ideal solution for making tee joints in main run tube.

Freeze Master 110v 15 - 42mm

Freeze Master 110v 15 - 42mm

Suitable for domestic and light industrial use the 420D has freeze heads to fit pipes from 15mm to 42mm.

8 CFM Compressor 130 PS1 C/W Hose and 1/2 Inch BSP Bush

8 CFM Compressor 130 PS1 C/W Hose and 1/2 Inch BSP Bush

This 8 CFM Compressor is a sturdy mid range air compressor packed with impressive features and capable of delivering a full 10 Bar working pressure.

Ridgid 472 (868) Hinged 4 Wheel Cutters 8 Inch to 12 Inch

Ridgid 472 (868) Hinged 4 Wheel Cutters 8 Inch to 12 Inch

Designed for rapid cutting of steel pipe and heavy-wall steel pipe.

Tubela Rotary Scissor Bender 15-54mm Carbon Steel/Copper

Tubela Rotary Scissor Bender 15-54mm Carbon Steel/Copper

The Tubela H3PR is a hand operated 2" nb (60.3mmOD) capacity ram-press pipe bender for Gas or Black pipe, but also for bending thicker wall hydraulic steel and stainless steel tubes that are being increasingly used in industry where higher pressures and temperatures are required. Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.

Back to Pipe Fitting

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools