Manual T Drill for Copper 15 - 42mm

Manual T Drill for Copper 15 - 42mm

Manual Tee- Extractor For Copper

Manual T Drill for Copper 15 - 42mm

Tee Extractor.

Operators Manual

Operators Manual

Recommended PPE

Tee Extractor.

Additional Information

Rothenberger Tee-Extractor Set

Capacity: 15-42mm

Type Of Set: Manual

Standard Equipment:
1 X Tee-Extractor Set, Inc: 1 X Unidrill,
1x Ratchet, 1 X Cam Pincer,
1 X Extractors, 15-42mm.

,

Related Products

Hire

T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a portable tee forming machine for copper tubes. It is an ideal solution for making tee joints in main run tube.

Hire

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a portable tee forming machine for copper tubes. It is an ideal solution for making tee joints in main run tube.

RX Roller Set Stainless Steel SCH 10 and Below

RX Roller Set Stainless Steel SCH 10 and Below

RX Roller Set to suit stainless steel SCH 10 and below.

Petrol Water Test Pump Max. 1500PSI / 100BAR

Petrol Water Test Pump Max. 1500PSI / 100BAR

228-petrol-water-test-pump-max-100-bar

This Hilta Petrol Water Test Pump is has a fuel Tank capacity 3.6 Ltrs and can reach a maximum pressure of 1500psi / 100bar.

Fein Reciprocating Pipe Saw 100mm to 325mm C/W Clamp

Fein Reciprocating Pipe Saw 100mm to 325mm C/W Clamp

Hacksaw for pipes and profiled sections.

Tubela Rotary Scissor Bender 15-54mm Carbon Steel/Copper

Tubela Rotary Scissor Bender 15-54mm Carbon Steel/Copper

The Tubela H3PR is a hand operated 2" nb (60.3mmOD) capacity ram-press pipe bender for Gas or Black pipe, but also for bending thicker wall hydraulic steel and stainless steel tubes that are being increasingly used in industry where higher pressures and temperatures are required. Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.

Back to Pipe Fitting

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools