Manual T Drill for Copper 15 - 42mm

Manual T Drill for Copper 15 - 42mm

Manual Tee- Extractor For Copper

Manual T Drill for Copper 15 - 42mm

Tee Extractor.

Operators Manual

Operators Manual

Recommended PPE

Tee Extractor.

Additional Information

Rothenberger Tee-Extractor Set

Capacity: 15-42mm

Type Of Set: Manual

Standard Equipment:
1 X Tee-Extractor Set, Inc: 1 X Unidrill,
1x Ratchet, 1 X Cam Pincer,
1 X Extractors, 15-42mm.

,

Related Products

Hire

T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a portable tee forming machine for copper tubes. It is an ideal solution for making tee joints in main run tube.

Hire

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a portable tee forming machine for copper tubes. It is an ideal solution for making tee joints in main run tube.

Ridgid 590L 14 Inch Dry Cut Saw

Ridgid 590L 14 Inch Dry Cut Saw

Ridgid 590L Dry Cut saw produces clean, virtually burr-free cuts on steel, copper, aluminium and plastics and an adjustable cutting angle 45 degrees - 90 degrees. Cuts Steel Tube up to 130mm and 115mm Box Section

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

Ridgid 472 (868) Hinged 4 Wheel Cutters 8 Inch to 12 Inch

Ridgid 472 (868) Hinged 4 Wheel Cutters 8 Inch to 12 Inch

Designed for rapid cutting of steel pipe and heavy-wall steel pipe.

Ridgid 975 Combo Insitu Roll Groover 1 1/4 Inch to 6 Inch

Ridgid 975 Combo Insitu Roll Groover 1 1/4 Inch to 6 Inch

The Model 975 Combo roll Groover is two tools in one. Like other RIDGID roll Groovers, the 975 mounts on the RIDGID 300 Power Drive for machine-powered roll grooving jobs, but is also designed to manually roll groove in-place pipe.

Back to Pipe Fitting

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools