Manual T Drill for Copper 15 - 42mm

Manual Tee- Extractor For Copper

Manual T Drill for Copper 15 - 42mm

Tee Extractor.

Add to Hire
Contact Us
Operators Manual
All Downloads
Operators Manual
Recommended PPE

Tee Extractor.

Additional Information

Rothenberger Tee-Extractor Set

Capacity: 15-42mm

Type Of Set: Manual

Standard Equipment:
1 X Tee-Extractor Set, Inc: 1 X Unidrill,
1x Ratchet, 1 X Cam Pincer,
1 X Extractors, 15-42mm.

,

Related Products

Hire
ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics.
This is an accessory to the T60 T-Drill.

View Product
Add to Hire
Hire
T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a
portable tee forming
machine for copper tubes.
It is an ideal solution for
making tee joints in main
run tube.

View Product
Add to Hire
Hire
T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a
portable tee forming
machine for copper tubes.
It is an ideal solution for
making tee joints in main
run tube.

View Product
Add to quote
Add to Quote
Hire
ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics.
This is an accessory to the T60 T-Drill.

View Product
Add to quote
Add to Quote
Hire
Ridgid 161 Receeder 4 Inch to 6 Inch

Ridgid 161 Receeder 4 Inch to 6 Inch

Increases capacity of 2 Inch or 3 Inch threader to 4 Inch.

View Product
Add to quote
Add to Quote
Hire
Ridgid HC450 Hole Cutter for Mechanical Tees

Ridgid HC450 Hole Cutter for Mechanical Tees

The HC450 is ideal for mechanical, industrial maintenance and fire protection contractors since it cuts holes into a wide variety of pipe materials.

View Product
Add to quote
Add to Quote
Hire
Rubber Drain Test Bags 2 Inch to 6 Inch

Rubber Drain Test Bags 2 Inch to 6 Inch

Ideal for air testing pipe systems.

View Product
Add to quote
Add to Quote
Hire
Ridgid 590L 14 Inch Dry Cut Saw

Ridgid 590L 14 Inch Dry Cut Saw

Ridgid 590L Dry Cut saw produces clean, virtually burr-free cuts on steel, copper, aluminium and plastics and an adjustable cutting angle 45 degrees – 90 degrees. Cuts Steel Tube up to 130mm and 115mm Box Section

View Product
Add to quote
Add to Quote
Back to Pipe Fitting
Back to All Hire Equipment
Over 30 YearsExperience & Knowledge
Fast ShippingAcross UK Mainland
Wide & ExtensiveSelection of Tools
  • Over 30 YearsExperience & Knowledge
  • Fast ShippingAcross UK Mainland
  • Wide & ExtensiveSelection of Tools