Pipe Threading Machines

Nipple Chuck

Ridgid Nipple Chuck

Ridgid

Nipple Chuck

Holds short or close nipples for threading.

Operators Manual

Operators Manual

Recommended PPE

Holds short or close nipples for threading.

More Information

Features

Holds short or close nipples for threading.
For use with 300 Power Drive, 300 Compact, 535 and 1822 (with adapter kit) and 1224 Threading Machines.

,

Related Products

Hire

Ridgid 246 Snap Cutter up to 6 Inch

Ridgid 246 Snap Cutter up to 6 Inch

The Ridgid 246 Snap Cutter is quick and convenient to use and requires minimal clearance around the pipe.

Hire

Hilmor 16 - 25mm Conduit Bender

Hilmor 16 - 25mm Conduit Bender

Conduit installation times are decimated and waste is significantly reduced.

Hire

REMS Multipush SLW Flushing Air and Water Test Pump

REMS Multipush SLW Flushing Air and Water Test Pump

Powerful, compact, electronic flushing and pressure testing unit with oil-free compressor.

Hire

T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a portable tee forming machine for copper tubes. It is an ideal solution for making tee joints in main run tube.

Freeze Master 110v 8 - 61mm

Freeze Master 110v 8 - 61mm

The 690E is made to make building maintenance easy. Fitted with two high capacity freeze heads it is ideal for the engineer who needs to tackle the larger industrial and commercial pipe sizes.

Rubber Drain Test Bags 2 Inch to 6 Inch

Rubber Drain Test Bags 2 Inch to 6 Inch

Ideal for air testing pipe systems.

8 Inch Pulling Tool

8 Inch Pulling Tool

With the pulling tool no blocks, chains or machinery are needed and all operations can be carried out by one man. Simply place the tool on the pipes and pull them together.

GF Cut & Bevel Machine RA4 1/2 Inch to 4 Inch C/W Bench

GF Cut & Bevel Machine RA4 1/2 Inch to 4 Inch C/W Bench

The GF Cut and Bevel Machine offers many advantages including multiple point clamping, fast adjustment of dimensions and regulated cutting speed.

Rex Threading Machine 1/2 Inch to 4 Inch NPT c/w Pipe Support

Rex Threading Machine 1/2 Inch to 4 Inch NPT c/w Pipe Support

Rex Threading Machine N100A.

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support.

Ridgid 161 Receeder 4 Inch to 6 Inch

Ridgid 161 Receeder 4 Inch to 6 Inch

Increases capacity of 2 Inch or 3 Inch threader to 4 Inch.

Drip Tray

For use under machines to protect floors etc.

Back to Pipe Threading Machines

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools