Rems Curvo 50 Bending Tool 32-50MM

Rems Curvo 50 Bending Tool 32-50MM

Rems Curvo

Rems Curvo 50 Bending Tool 32-50MM

Universal, compact electric tool for cold bending of pipes and tubes up to 90 degrees. Can be used anywhere, without vice.

Operators Manual

Operators Manual

Recommended PPE

Universal, compact electric tool for cold bending of pipes and tubes up to 90 degrees. Can be used anywhere, without vice.

Additional Information

Features:

wrinkle free bending of large pipes.
Instant use without setting.
Fast and creep speed operation for precise bending.
Rapid change of bending and back formers.

,

Related Products

Hire

6 Inch Pulling Tool

6 Inch Pulling Tool

With the pulling tool no blocks, chains or machinery are needed and all operations can be carried out by one man. Simply place the tool on the pipes and pull them together.

Hire

Rems Amigo Conduit 16 to 32MM

Rems Amigo Conduit 16 to 32MM

Powerful, easy-to-operate electric tool for threading with unique, patented support bracket. Ready for use anywhere, without vice. Ideal for repair, renovation, job site.

Hire

Hilmor 16 - 25mm Conduit Bender

Hilmor 16 - 25mm Conduit Bender

Conduit installation times are decimated and waste is significantly reduced.

Hire

REMS Multipush SLW Flushing Air and Water Test Pump

REMS Multipush SLW Flushing Air and Water Test Pump

Powerful, compact, electronic flushing and pressure testing unit with oil-free compressor.

Rems Amigo 1/2 Inch to 2 Inch 110v

Rems Amigo 1/2 Inch to 2 Inch 110v

Powerful, easy-to-operate electric tool for threading with unique, patented support bracket. Ready for use anywhere, without vice. Ideal for repair, renovation, job site.

7.5 CFM Compressor 115 PS1 C/W Hose and 1/2 Inch BSP Bush

7.5 CFM Compressor 115 PS1 C/W Hose and 1/2 Inch BSP Bush

High output with compact dimensions makes this tough piston compressor especially handy for on-site tasks involving fixing, spraying, inflating and dust / debris blowing.

Rubber Drain Test Bags 2 Inch to 6 Inch

Rubber Drain Test Bags 2 Inch to 6 Inch

Ideal for air testing pipe systems.

6 Inch Axxair Cutter C/W Bench

6 Inch Axxair Cutter C/W Bench

The Axxair cutter offers cutting without tube deformation and is ideal for thin wall stainless tubes and pipes. It provides a cut of quality geometry leaving a good surface condition.

Mapress Copper Kit 7C 15-108MM

Mapress Copper Kit 7C 15-108MM

This kit comprises of a Novopress Cordless Press tool (ACO203XL) complete with 15-108mm collars and adaptors suitable for Geberit copper press fittings.

Viega Steel Kit 2 15-54MM

Viega Steel Kit 2 15-54MM

This kit comprises of a Viega Battery press tool complete with 15-54mm jaws suitable for Viega Steel Sanpress Systems.

H/G1 Hydraulic Powered Compression Sleeve Tool 50-110MM

H/G1 Hydraulic Powered Compression Sleeve Tool 50-110MM

Rehau Hydraulic mechanical powered compression sleeve tool for the dimensions 50-110 mm.

Novopress ACO401 Press Tool

Novopress ACO401 Press Tool

The Novopress ACO401 press tool offers sufficient power for large pipe dimensions such as sprinklers, fire extinguishers or special industrial plant. The rotatable head with the fixed intermediate jaw allows the device to be attached to hard-to-reach pressing points.

Back to Press Fitting

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools