Rems Curvo 50 Bending Tool 32-50MM

Rems Curvo 50 Bending Tool 32-50MM

Rems Curvo

Rems Curvo 50 Bending Tool 32-50MM

Universal, compact electric tool for cold bending of pipes and tubes up to 90 degrees. Can be used anywhere, without vice.

Operators Manual

Operators Manual

Recommended PPE

Universal, compact electric tool for cold bending of pipes and tubes up to 90 degrees. Can be used anywhere, without vice.

Additional Information

Features:

wrinkle free bending of large pipes.
Instant use without setting.
Fast and creep speed operation for precise bending.
Rapid change of bending and back formers.

,

Related Products

Hire

RX Roller Set Carbon SCH 10 and Below

RX Roller Set Carbon SCH 10 and Below

RX Roller Set Carbon SCH 10 and Below.

Hire

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support.

Hire

Gf Cut & Bevel Machine RA6 2 Inch to 6 Inch C/W Bench

Gf Cut & Bevel Machine RA6 2 Inch to 6 Inch C/W Bench

The GF Cut and Bevel Machine offers many advantages including multiple point clamping, fast adjustment of dimensions and regulated cutting speed.

Hire

Ridgid 466 Hinged 4 Wheel Cutter 4 Inch to 6 Inch

Ridgid 466 Hinged 4 Wheel Cutter 4 Inch to 6 Inch

Designed for rapid cutting of steel pipe and heavy-wall steel pipe.

Rems Solar Push K60

Rems Solar Push K60

Self-suction centrifugal pump, suitable for different transport media, e.g. heat transfer liquids, antifreeze, water, aqueous solutions, emulsions. With proven, powerful condenser motor, quiet running, 860 W, on/off switch.

Ridgid 918 Hydraulic Groover Supplied 8 Inch to 12 Inch

Ridgid 918 Hydraulic Groover Supplied 8 Inch to 12 Inch

The RIDGID Model 918 Hydraulic Roll Groover features a powerful 15-ton hydraulic ram in a compact, easy to transport unit. With one man set-up and operation, the 918 is the ideal groover for job site requirements.

Ridgid Stud Cutter 8MM

Ridgid Stud Cutter 8MM

The 1390 Threaded Rod Cutter is designed to cut threaded rods used to hang pipes for air conditioning, sprinkler installations and other lightweight frames from the ceiling. Makes clean cuts without damaging thread.

Ridgid 915 Portable Roll Groover 2 Inch to 6 Inch

Ridgid 915 Portable Roll Groover 2 Inch to 6 Inch

The RIDGID 915 Roll Groover is a manual roll groover for in-place field applications.

SANHA Steel Kit 4 42-54MM

SANHA Steel Kit 4 42-54MM

This kit comprises of a Novopress 42 and 54mm Adaptor Kit for a Novopress press tool suitable for SANHA carbon, stainless and bronze press fittings.

Mapress Sprinkler Kit 1

Mapress Sprinkler Kit 1

LPCB approved Geberit Mapress Novopress ECO301 110V presstool for stainless and carbon steel sprinkler systems.

Mapress Copper Kit 2 15-35MM

Mapress Copper Kit 2 15-35MM

This kit comprises of a Novopress cordless press tool (ACO203) complete with 15-35mm jaws suitable for Geberit copper press fittings.

Viega Megapress XL – Press Booster Kit

Viega Megapress XL – Press Booster Kit

Viega Megapress XL – Press Booster Kit – supplied with 2 ½” pressing jaw for steel tube as standard (3” & 4” pressing jaws supplied separately)

Back to Press Fitting

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools