Pipe Threading Machines

Ridgid 161 Receeder 4 Inch to 6 Inch

Ridgid 161 Receeder 4 Inch to 6 Inch

161 Threeder

Ridgid

Ridgid 161 Receeder 4 Inch to 6 Inch

Increases capacity of 2 Inch or 3 Inch threader to 4 Inch.

Operators Manual

Operators Manual

Recommended PPE

Increases capacity of 2 Inch or 3 Inch threader to 4 Inch.

More Information

Use– Accessory for Ridgid 300
Capacity– 4 Inch to 6 Inch
Optional Extras– Ratchet arm for manual in-situ threading, Pipe Support

Features

Jaw clutch prevents jamming.
Simple adjustment for tapered or straight threads.
Cam-type workholder sets instantly.
Fully enclosed gearing.
Right-hand only

,

Related Products

Hire

Rems Solar Push K60

Rems Solar Push K60

Self-suction centrifugal pump, suitable for different transport media, e.g. heat transfer liquids, antifreeze, water, aqueous solutions, emulsions. With proven, powerful condenser motor, quiet running, 860 W, on/off switch.

Hire

Ridgid 258 Hydraulic/Powered Pipe Cutter 2 1/2 Inch to 8 Inch

Ridgid 258 Hydraulic/Powered Pipe Cutter 2 1/2 Inch to 8 Inch

The RIDGID Model 258 Power Pipe Cutter cuts 2 1/2 Inch (65 mm) to 8 Inch (200 mm) schedule 10*/40 steel pipe, galvanized pipe, rigid conduit, etc. Powered by the RIDGID No. 700 Power Drive (110v) or Ridgid 760 FXP Power Drive (60v cordless) , the 258 is a displacement cutter that provides square cuts.

Hire

Hilmor 15 - 22mm Scissor Bender

Hilmor 15 - 22mm Scissor Bender

A compact bender with precision high pressure aluminium die cast formers and guides to produce sets, offsets, multiple bends etc in tubes of a maximum diameter of 22 mm.

Hire

Victaulic VE416 FSD 2 Inch to 12 Inch OGS Pipe

Victaulic VE416 FSD 2 Inch to 12 Inch OGS Pipe

The Victaulic VE416 Roll Grooving Tool Equipped with a pipe stabilizer for 6 Inch -16 Inch pipe sizes to control pipe sway. Groove depth adjuster provides precise groove dimensions and allows for easy adjustment for initial groove diameter.

Fein Reciprocating Pipe Saw 100mm to 325mm C/W Clamp

Fein Reciprocating Pipe Saw 100mm to 325mm C/W Clamp

Hacksaw for pipes and profiled sections.

Hilti VC 40 UM, M class vacum

Hilti VC 40 UM, M class vacum

The Hilti VC40 is a Universal wet and dry vacuum cleaner with automatic filter cleaning. It has a tank capacity of 36 litres.

Ridgid 918 Hydraulic Groover Supplied 2 Inch to 6 Inch

Ridgid 918 Hydraulic Groover Supplied 2 Inch to 6 Inch

The RIDGID Model 918 Hydraulic Roll Groover features a powerful 15-ton hydraulic ram in a compact, easy to transport unit. With one man set-up and operation, the 918 is the ideal groover for job site requirements.

8 Inch Axxair Cutter C/W Bench

8 Inch Axxair Cutter C/W Bench

The Axxair cutter offers cutting without tube deformation and is ideal for thin wall stainless tubes and pipes. It provides a cut of quality geometry leaving a good surface condition.

Nipple Chuck

Holds short or close nipples for threading.

Rex Threading Machine 1/2 Inch to 4 Inch NPT c/w Pipe Support

Rex Threading Machine 1/2 Inch to 4 Inch NPT c/w Pipe Support

Rex Threading Machine N100A.

Ridgid Additional Die Head

Ridgid Additional Die Head

Additional Die Head.

Drip Tray

For use under machines to protect floors etc.

Back to Pipe Threading Machines

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools