Ridgid Roll Grooving Equipment

Ridgid 918 Stabilizer Kit

Ridgid 918 Stabilizer Kit

918 Stabilizer Kit

Ridgid

Ridgid 918 Stabilizer Kit

Stabilizer kit to be used in conjunction with the Ridgid 918 Groover.

Operators Manual

Operators Manual

Recommended PPE

Stabilizer kit to be used in conjunction with the Ridgid 918 Groover.

Additional Information

Features:

Stabilizer kit to be used in conjunction with the Ridgid 918 Groover

,

Related Products

Hire

Rems Curvo 50 Bending Tool 32-50MM

Rems Curvo 50 Bending Tool 32-50MM

Universal, compact electric tool for cold bending of pipes and tubes up to 90 degrees. Can be used anywhere, without vice.

Hire

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

Hire

Fein Reciprocating Pipe Saw 100mm to 325mm C/W Clamp

Fein Reciprocating Pipe Saw 100mm to 325mm C/W Clamp

Hacksaw for pipes and profiled sections.

Hire

Nipple Chuck

Holds short or close nipples for threading.

Ridgid 46 Pipe Support

Ridgid 46 Pipe Support

Ideal for use with threading machines, roll grooving, or other pipe working applications.

Rems Curvo 15 - 28mm 110v Bender

Rems Curvo 15 - 28mm 110v Bender

Universal, compact electric tool for cold bending of pipes and tubes up to 180 degrees. Can be used anywhere, without vice.

Tubela 15-54mm Ratchet Assisted Copper Bender

Tubela 15-54mm Ratchet Assisted Copper Bender

For all your tube bending requirements for copper, stainless steel, aluminium, conduit, mild steel tube. Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.

Scorp Cutter 1 Inch to 8 Inch 110v Square Cut

Scorp Cutter 1 Inch to 8 Inch 110v Square Cut

The ultimate and fast solution for cutting of cast iron, stainless steel, steel, copper, aluminum and plastic pipes.

Ridgid 916 Portable Roll Groover 1 1/4 Inch to 6 Inch

Ridgid 916 Portable Roll Groover 1 1/4 Inch to 6 Inch

The RIDGID Model 916 Roll Groover is the most durable and efficient lightweight portable unit available. Built with a solid, durable cast-iron housing, it withstands heavy usage, yet is light enough for easy transportation.

Ridgid HC450 Hole Cutter for Mechanical Tees

Ridgid HC450 Hole Cutter for Mechanical Tees

The HC450 is ideal for mechanical, industrial maintenance and fire protection contractors since it cuts holes into a wide variety of pipe materials.

Ridgid 916 Roll Groover 1 Inch Only

Ridgid 916 Roll Groover 1 Inch Only

The RIDGID Model 916 Roll Groover is the most durable and efficient lightweight portable unit available. Built with a solid, durable cast-iron housing, it withstands heavy usage, yet is light enough for easy transportation.

Ridgid 918 Roll Groover, Power Drive & Pipe Support

Ridgid 918 Roll Groover, Power Drive & Pipe Support

The RIDGID Model 918 Hydraulic Roll Groover features a powerful 15-ton hydraulic ram in a compact, easy to transport unit. With one man set-up and operation, the 918 is the ideal groover for job site requirements.

Back to Ridgid Roll Grooving Equipment

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools