Transfer Pump 110v


Transfer Pump 110v


This transfer pump is self-priming with bronze bodies and impellers. With a forward and reverse switch for filling and emptying duties they are good, general-purpose, portable pumps for circulating and transfer of water, sea-water, juices, gas oil, bio-fuel, transformer oil and mild chemicals.
Contact Us

This transfer pump is self-priming with bronze bodies and impellers. With a forward and reverse switch for filling and emptying duties they are good, general-purpose, portable pumps for circulating and transfer of water, sea-water, juices, gas oil, bio-fuel, transformer oil and mild chemicals.

Additional Information

Features:

  • Self-priming and have bronze bodies and single impellers.
  • 316 stainless steel shafts, fitted with carbon ceramic and NBR mechanical seals. (Viton® is available at extra cost).
  • IP44 motors have a forward and reverse switch for filling and emptying duties.
  • They are designed mainly for pumping clean liquids at temperatures up to a maximum of 90ºC, but can also handle very small soft solids, in suspension.
  • Maximum recommended suction lift, with a foot valve, is 6 metres.
  • These are good, general-purpose, portable pumps for circulating and transfer of water, sea-water, juices, gas oil (“red diesel”), bio-fuel, transformer oil and mild chemicals.
  • THEY MUST NOT PUMP DERV (“white diesel”), petrol, solvents or products with a low flash point.

Related Products