Grinding & Cutting

Grinding & Cutting

9 Inch Angle Grinder

9 Inch Angle Grinder

Makita 9 Inch Grinder

Makita

9 Inch Angle Grinder

This 9 Inch Makita Angle Grinder offers double insulation and low vibration levels.

Operators Manual

Operators Manual

Recommended PPE

This 9 Inch Makita Angle Grinder offers double insulation and low vibration levels.

Additional Information

Features:

Large trigger switch.
Double Insulation
Low vibration.
Rotatable rear handle.

Specification:

Bore Diameter22 mm
Spindle SizeM14x2mm
Max Wheel Diameter230 mm
Input wattage2400 w
No Load Speed6600 rpm
Vibration: Artificial Wheel 5.5 m/sec²
Net weight 5.6 kg

,

Related Products

Hire

Makita 18v Circ Metal Cut Saw

Makita 18v Circ Metal Cut Saw

The Makita 18v Circ Metal Cut Saw offers a double safety trigger and high comfort grips.

Hire

Reciprocating Shark Saw

Reciprocating Shark Saw

This Makita reciprocating saw offers variable speed control and double insulation.

Hire

Makita 18v Cordless Shark Saw

Makita 18v Cordless Shark Saw

Makita 18v Cordless Shark Saw operates on lithium-ion batteries that have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.

Hire

Lindab SR Spiral Duct Cutter

Lindab SR Spiral Duct Cutter

A Spiral Duct Cutter on site will easily and efficiently give you precise and accurate cuts every time. New to our fleet, the working bench/platform cuts circular ducts of diameters Ø 80–315 and lengths 200–3000 mm.

Fein Reciprocating Pipe Saw 100mm to 325mm C/W Clamp

Fein Reciprocating Pipe Saw 100mm to 325mm C/W Clamp

Hacksaw for pipes and profiled sections.

415v Plasma Cutter 1538

415v Plasma Cutter 1538

The Tomahawk 1538 Plasma cutting machine is built to handle harsh environmental conditions using Lincoln tunnel technology to separate the PCBâ€™s and sensitive parts from the contaminating cooling airflow.

STRUTSLAYR Strut Shear Head KIT, HEAD+CASE + 41 mm x 41 mm DIE

STRUTSLAYR Strut Shear Head KIT, HEAD+CASE + 41 mm x 41 mm DIE

The RIDGID© STRUTSLAYR™ delivers quality, burr-free strut channel cuts on the jobsite in 5 seconds or less. Supplied with RIDGID 32kN press tool*, the STRUTSLAYR strut cutter offers a clean, consistent cut with a simple pull of a trigger: no grinding or sawing sparks!

Reciprocating Shark Saw

Reciprocating Shark Saw

This Makita reciprocating saw offers variable speed control and double insulation.

Cross Cut Mitre Saw

Cross Cut Mitre Saw

LS0815FL is a 216mm (8-1/2”) cost-effective slide compound mitre saw with an integrated laser maker.

Hilti DCSE20 Wall Chaser

Hilti DCSE20 Wall Chaser

This wall chaser is equipped with 125mm discs (sold separately) and will cut depths to 40mm and widths up to 46mm. For insulation of pipe and conduits in walls.

4 1/2 Inch 18v Cordless Grinder

4 1/2 Inch 18v Cordless Grinder

This 4 1/2 Inch 18v Cordless Grinder offers a 22 minute charge time with the air cooled Makstar Optimum Charging System.

RIDGID RP350-B PRESS TOOL

RIDGID RP350-B PRESS TOOL

The RIDGID RP 350 features a brushless motor that is capable of over 100,000 press cycles and requires no scheduled maintenance. Get access to hard-to-reach locations with endless 360° swivel. With the most advanced LED interface and lighting, the RP 350 has been upgraded from top to bottom. This RP350 comes with a charger and one battery.

Back to Grinding & Cutting

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools